Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
ICE MAKER KIT-PKG ASSEMBLY (EZ Specifications
This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator including: the ice maker, ice bin, inlet valve, fill tube, and hardware. If your new ice maker does not function properly after being installed, check the freezer temperature. The freezer must to be around zero degrees Fahrenheit. Remember to disconnect the power and water supply to your refrigerator before beginning this installation. Make sure to check that your model is compatible with this part before ordering.
Note: The manufacturer has updated this part. It may differ in appearance but will function the same as the original.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice | Leaking
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# W11700559 replaces these:
2155468, 2155469, 2155469A, 2171811, 8560, ECKMF94, ECKMF95, ECKMFEZ1, ECKMFEZ2, W10365049, W10365751, W10670871, W10711927, W11700561, WPW10715708, WPW10715709
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Gord L - July 9, 2019
Verified Purchase
Super fast and super easy!
Bought an ice maker - super easy install and part came in2 days!
Mark R - January 29, 2022
Verified Purchase
Easy install works great
Took under 10 minutes to install. Only complaint, I didn’t make sure the tube was inserted properly to feed the water so I ended up with a sheet of ice in my freezer. Once installed properly it worked just great!
Annick G - June 15, 2021
Verified Purchase
Work as expected
The part was perfect like i was expected!
Ian D - January 21, 2021
Verified Purchase
Exactly as expected, relatively easy to install
We bought this to install in a new Whirlpool upright freezer. I'm fairly handy but usually not with plumbing! I was able to get it done in under an hour with minimal hassle. Once installed it took about 2 hours to start pumping out ice. Worked like a charm!
Conrad G - October 7, 2019
Verified Purchase
easy add on, works great so far
very easy to install, worked like it should, we will see in a few years if its still good
Robert M - March 24, 2022
Verified Purchase
Ice Machine
Part was exactly as described. Pretty much an easy install. Working great!
Fintan B - August 15, 2018
Verified Purchase
Thought I had it wrong - but PartSelect were right.
Ordered this ice make to fit a Kenmore side by side. Arrived quite fast, everything in the box in great shape. Upon first attempt to install, thought we had ordered the wrong one - but discovered it was our mistake as we had not disconnected the plastic protector from the plug inside the freezer unit. Now that it is hooked up and working, can't hardly keep up with the ice it produces, which is fairly large size. However, still had to find a water connection to go from the pump to the source, and it is quite specific, but did get one. As well, the basket for the ice to drop into could be made of more durable plastic, it's not as strong as the one from my previous ice maker, but still quite good. Overall, very happy with it and would certainly order from PartSelect anytime.
Ronald Y - September 26, 2022
Verified Purchase
glad to have ice machine back in working order
even though ice maker kit was back ordered and took a bit longer to arrive it was worth the wait. Once we got it hooked up which we needed a bit of help with it is working good
Tim F - August 24, 2018
Verified Purchase
easy install works better the one downstairs
Just the right part even when no one can find it and it was an easy install.
Rick B - March 25, 2020
Verified Purchase
Fantastic service, the unit was at my door within 3 days.
We added a ice maker upright freezer. This unit adapted perfectly. Installation took less then 90 minutes. My wife loves it!!!
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 17 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wanted to install ice maker in my freezer
I was clening my uprght freezer and noticed that it was preped for an icemaker. I first went to the Whilpool website and could not find my part as my freezer was a 2008 model.
I saw PartSelect on the search page and went to thier site.
I put in my modle number of the Whilpool Ice maker kit that was on the back of my freezer. PartSelect had the part in stock and approx $18.00 less than the other kits listed on the Whilpool site (that did not match my kit number). I orderd the kit on Sunday and it arrived on Wednesday. It took less than and hour to install. Every part I needed was included. The following day I installed the water line and now I have an extra icemaker.
I saw PartSelect on the search page and went to thier site.
I put in my modle number of the Whilpool Ice maker kit that was on the back of my freezer. PartSelect had the part in stock and approx $18.00 less than the other kits listed on the Whilpool site (that did not match my kit number). I orderd the kit on Sunday and it arrived on Wednesday. It took less than and hour to install. Every part I needed was included. The following day I installed the water line and now I have an extra icemaker.
Other Parts Used:
-
Donald A. from ORLANDO, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
77 of 112 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
REplaced ice maker
Replacement was very easy as new ice maker was identical to the old one. Took about 10 minutes.
Other Parts Used:
-
M from Lafayette, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
30 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The icemaker in the fridge stopped working
The repair was so simple. I removed the old icemaker in about 3 minutes and unpacked and installed the new one is about 10 minutes. It was literally a matter of removing a few screws! Eady to follow instructions!
Other Parts Used:
-
Rebecca from Dayton, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
18 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
installed ice maker
From the time I started to finish I worked 3 hours, this included installing the new ice maker, cutting into the cold water line in the basement and installing a t with a 6inch piece of pipe with a compression valve to connect to the small cooper tube, this is worth your time to do it this way, its a lot better connection than the small pierce valves that come with the kit, they will leak over time. I installed the filter in the waterline in the basement for easy access
Other Parts Used:
-
Dennis from Spring Valley, MN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench set
13 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wrong electrical connector.
I bought a new Whirlpool Refrigerator that didn't have an ice maker.
I wanted to install an ice maker. I searched your web site and found the model ice maker model it said I needed. WPW10715709. This one was a 4 wire 8 terminal. I needed a 4 wire flat connector. WPW10715708. You approved the return. It cost me $50 to return it. I believe you should refund me the cost of this postage. Your web site gave me the wrong model number.
Thank you
I wanted to install an ice maker. I searched your web site and found the model ice maker model it said I needed. WPW10715709. This one was a 4 wire 8 terminal. I needed a 4 wire flat connector. WPW10715708. You approved the return. It cost me $50 to return it. I believe you should refund me the cost of this postage. Your web site gave me the wrong model number.
Thank you
Other Parts Used:
-
ROBERT from BUENA PARK, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
11 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
OLDER Ice Maker on the fritz
Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric
Other Parts Used:
-
Eric S from Boca Raton, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench set
6 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The parts where incorrect
I received two Ice Maker kits and one was packaged wrong and the second was also wrong, I called the support staff and worked with them for over two hours before being told I could return the wrong parts for a full refund. After two / three weeks and a second call I received a email stating my refunds are being processed and I was charged shipping and return fee’s buyer beware!
Other Parts Used:
-
Dwight from BURLINGTON, CT
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I added an ice maker to a 20 year old refridgerator
I added an icemaker kit. Everything I needed was in the kit. The refrigerator was presetup for an icemaker it was just never added. The only problem I had was that the holes for attaching the water solenoid were not pre drilled so I had to drill them myself and use sheet metal screws. The icemaker is working great.
Other Parts Used:
-
Nicholas from WEST CHESTER, OH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It was my first time to install a ice maker.
I first read the instruction manual then I watched the installation video. My water line to it was 3/8. Went to the local ACE Hardware to purchase a short peace of 1/4 copper tubing and the fittings to connect them together. It makes ice every 55 minutes.
Other Parts Used:
-
Gary from MACOMB, OK
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Getting Ice Maker to sit in place prior to tightening screws.
Don not completely remove holding icemaker screws. Unit slips over screws and drops down into place and the use nutdriver to tighten in place. Rest of unit was sound and wasn’t replaced.
After icemaker is installed wait for a while and unit self activated and creates ice cubes.
After icemaker is installed wait for a while and unit self activated and creates ice cubes.
Other Parts Used:
-
George from POWELL, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS17629131
Manufacturer Part Number: W11700559
Manufacturer Part Number: W11700559
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST