If your washer isn’t draining properly, this water pump could be the fix. It’s the part that helps push water out during the drain cycle, keeping your laundry routine running smoothly. Made to fit select models, it’s a reliable replacement that’s easy to install—just make sure your washer is unplugged and check that it’s the right fit before ordering.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not drain | Draining Issues
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Maytag, Amana.
Part# W11458345 replaces these:
W10918608, W11316609, W11319789
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nickolas W - February 21, 2025
Verified Purchase
Easy peasy
Good quality, easy to put in.
★★★★★
★★★★★
Ron P - April 28, 2021
Verified Purchase
Fast shipping
The part was identical to the original, very fast shipping.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Phyllis
May 24, 2023
Does this also fix the spin problems? My machine stopped draining and spinning. We've cleaned out the drain, but still won't spin during drain & spin. Is this part compatible with WFW5620HW0 or do I need something else?
For model number WFW5620HW0
Hello Phyllis, thank you for the question. The drain pump, part number PS16218041, is compatible with your model. It is only associated with draining the washer. If the washer is not draining properly, it can cause the washer to not enter the spin cycle. We hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
March 3, 2023
Is this part the same as a drain pump?
For model number WFW5605MC0
Hello Mary, We are glad you asked? Yes, Drain pump assembly PS16218041 removes water from the washer. We are pleased to have been able to help.
2 people found this helpful.
Was this helpful?
Thank you for voting!
CAROL
August 17, 2023
WHAT OTHER PARTS ARE NECESSARY TO REPLACE THE DRAIN PUMP?
For model number WFW6620HW0
Hello Carol, thank you for your inquiry. You only need a drain pump and tools to replace it, you do not need other parts to replace the drain pump. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Christopher
October 24, 2024
Is this pump replaced from rear or front of washer?
For model number WFW9620HC0
Hello Christopher, thank you for your question. You can access the water pump from the Rear. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Fitzroy
February 22, 2025
My washer is leaking from the bottom, I noticed it happens in the longer cycles.
Is it possible it is caused by clamp or seal on the water pump?
For model number WFW6620HW0
Hello Fitzroy, thank you for your question. Yes, we have a video that should be of some help for you to aid in inspecting the bottom for a loose Clamp PS11743008. You should check both of the Inlet valves PS17216730 and PS17216729. Lastly, while you are checking the hoses, and clamps, look to see if the Pump PS16218041 has damage. We hope this helps.
I can hear my pump running,, it drains but and I can hear it drain. But will not enter spin cycle. is there a sensor on the pump or does the whole pump need to be replaced?
For model number MHW6630HC3
Hello Bryan, thank you for contacting us. According to our research, the issue is most probably with the control board. The control board comes along with the touchpad and control panel, part number PS12711864. You may need to replace it to solve the problem. We hope this helps!
What part controls the water flow into the washer? when it shuts off it is very quick and hammers the pipes?. I didn't have this problem until I bought this washer.
Thanks
For model number wfw6620hc2
Hello Jim, thank you for asking. We have researched and found that a common cause of water hammers can be fast-acting valves on washing machines. These valves suddenly stop the water that is moving along the pipes. A shockwave results, and this causes the pipes to shudder, causing the banging. The banging gets worse as the valves are worn. You may need to check the water inlet valve, part number PS12711564, to fix the issue. We hope this information helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
