This spark module generates reliable ignition to ensure consistent startup during operation. Proper ignition improves safety and dependable performance. Replacing a faulty module restores reliable ignition and smooth operation.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dermot
February 28, 2020
Where would i find installation instructions or a how to videu for this module
For model number wb13t10078 ge spark module in aa monogram gas stove top
Hello, Thank you for your question. You will need to look into removing the front panel once you get that off you will have access to the valves and the spark module. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tyrone
June 6, 2023
None of the burners spark for ignition. I'm thinking ignition module ?
For model number ZGU36NGH5SS
Hi Tyrone, thank you for writing in. The most common reason a gas stove won't light is that the igniter is clogged with debris. Over time, dirt and dust can accumulate on the igniter and prevent it from sparking. If this is the case, you'll need to clean it off in order for the stove to work properly. If after a good clean there is still no spark, then the Spark Module will have to be replaced. The correct part number for your model is PS2344294. We hope this helps.
All burners ignite however the ignitor continues to click while the 2 back burners are lit. What do you suggest?
For model number ZGU36L4RH3SS
Hi Louis,
Thank you for your question. It sounds like you may need to check the electrode and your igniter switch. If both of those parts are fine the problem may be in your spark module. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Jim
August 27, 2025
One of the 4 range burners on our GE Monogram continues to click after turning OFF the range. The other 3 burners ignite and turn off correctly. We have tried cleaning the burner and ignitor. Not sure if the problem might be the Igniter Switch or possible even the Spark Module. The only way for it to stop is to Kill the power at the Breaker for the Range. Any insight would be appreciated. Thanks
For model number ZDP48L4GH1SS
Hello Jim, thank you for contacting us. You will need to check the igniter switch, part number PS651383, and the spark module, part number PS1480956. Carefully inspect the switch under the affected knob for any signs of physical damage or trapped food debris. If the switch is burned or damaged, it will need to be replaced. If the igniter continues to spark even after the switch has been checked, the spark module, which is responsible for sending sparks to all burners, might be faulty. We hope this information helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
