Introducing the robust GE Foot Grate, carefully designed to keep your cooktop smooth and damage-free. Constructed from premium materials, this sturdy burner grate pad sticks effortlessly to the bottom...
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
This surface burner spark electrode is designed to ignite a gas burner by producing a reliable spark when the control is turned on. It helps restore proper burner operation when there is no spark, a w...
If your appliance is starting to dim, the GE Lamp Halogen might just be the solution you need. This 20-watt light bulb not only brightens up your appliance, but also ensures it works at its absolute b...
You're looking at the GE Surface Burner Grate Support Frame, a top-notch replacement part specially built for your GE range. This support frame is what keeps your burner grate secure and steady, provi...
This cast iron burner grate gives your cooktop a sturdy, stylish upgrade. It holds pots and pans securely over the flame and spreads heat evenly for better cooking results. The smooth gray finish look...
This burner cap replaces a worn or discolored cap on high-output burners, helping ensure even heat distribution and reliable cooking performance. Designed for 18,000-BTU burners, it’s a direct drop-in...
Struggling with a broken knob on your GE range? Get it fixed quickly and conveniently with our GE Surface Burner Knob, a vital part for your kitchen stove. Known as a thermostat knob, this handy piece...
$86.53
Special Order
Questions And Answers for ZDP304NP8SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michel
December 19, 2024
After an Auto Clean, gas does not flow at all to the cooktop to any of the 4 burners. It's like a protection switch was activated by the auto clean but not disactivated when cleaning was completed.
For model number ZDP304NP8SS
Hi Michel,
Thank you for your question. When the oven does a self-clean the oven temperatures can reach 900 degrees F. This may have shorted the high limit thermostat found behind the back panel of the oven. The part number for the high limit switch is PS2353546. We hope this helps!
I asked a question last week about the situation where, after an auto clean, gas does not flow at all to the cooktop to any of the 4 burners. It's like a protection switch was activated by the auto clean but not disactivated when cleaning was completed.
On your answer, you mentioned that this may have shorted the high limit thermostat found behind the back panel of the oven. The part number for the high limit switch is PS2353546. I bought the high limit switch from you guys and I just installed it. Still does not work.
While I had the range open, I tested the old limit switch for continuity and everything seemed to be OK. So the limit switch was not the problem since the beginning. Any other idea on wat the problem might be ?
Thanks.
For model number ZDP304NP8SS
Hello Michel, Thank you for your inquiry. The other parts to check would be the temperature sensor, the transformer, and also check for any blockages or loose wiring connections. We hope this helps.
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.
1) pull out the stove 2) remove the 7 sheet metal screws holding the back panel on. (the panel that also covers where the cord splits and connects to the oven. 3) Find the small plastic connector located in the middle of the back of the range and unplug it. 4) open the front of the oven and remove the one screw holding in the oven temp sensor. 5) replace the sensor and make sure to "feed" the new cord through as best you can. 6) I had to dig through the insulation a little bit to find the new wiring harness 7) connect the wiring harness and put the back of the range back on
note: this was very simple to do if you think this might be the problem don't hesitate to handle this one yourself.
