Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Drain Pump Specifications
Meet the Whirlpool Drain Pump, your answer to solving standing water issues in your dishwasher. This critical device plays a key role in making your dishwasher run smoothly. It efficiently removes water during the important drain phase, so you can say goodbye to unwanted water in your dishwasher once and for all. This dependable part is an authentic Whirlpool OEM product, designed specifically for various models of Whirlpool dishwashers. This promises a seamless fit and optimized performance, helping get your appliance back to operating just like new. Before you get started, remember to disconnect your dishwasher and turn off the water supply for your own safety. We also suggest wearing gloves to protect your hands during installation. Importantly, make sure to check that this Whirlpool Drain Pump is compatible with your dishwashers specifications. This will ensure you get the best performance and longer life-span out of both your dishwasher and this replacement part. With the Whirlpool Drain Pump, youre choosing reliability, efficiency, and enhancing your dishwashing routine. Its not just a replacement partits a step towards improved home appliance performance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, KitchenAid, Maytag, Kenmore.
Part# W11412291 replaces these:
W11035709
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Dennis C - May 29, 2022
Verified Purchase
OEM part
Brand new, arrived undamaged
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
I was getting the F9 E1 error code intermittently then consistently.
Checked drain hose and it was clear without kinks. I shut of the electrical breaker. Verified no power to washer. Removed the lower trim panel. Lowered the adjustable feet to allow me to slide my unit out. Disconnected drain hose from unit. Pulled unit from cabinet. My drain pump is located on the right bottom side when facing the door of the unit. I did not need to lay the unit on its side and have enough power cable to not have to disconnect it while still pulling the unit all the way out of the cabinet. The pump is easily accessed from the right side hidden behind insulation. Disconnected power wire from pump. Pressed down locking latch and turned pump counter clockwise removed then replaced in opposite order. I have run 3 load’s before posting this and as of now my dishwasher is functioning perfectly.
Other Parts Used:
-
Bruce from MADISON, MS
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
11 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace dishwasher drain pump
Relatively simple. Unhook electrical, water supply, and hose from drain air gap. Unscrew two screws that hold in the dishwasher and pull it out slowly making sure you do not damage the insulation.
Have a couple of towels nearby because when you tip the dishwasher on it's side some water will spill out.
Locate the old drain pump, disconnect it. Then pull the lever on the side of the pump and twist it off. Check to see if there are any materials that may be blocking the pump. Also good time to clean out the drain line.
Insert the new pump and put everything back in reverse order.
Make sure the dishwasher is level horizontally and vertically.
Have a couple of towels nearby because when you tip the dishwasher on it's side some water will spill out.
Locate the old drain pump, disconnect it. Then pull the lever on the side of the pump and twist it off. Check to see if there are any materials that may be blocking the pump. Also good time to clean out the drain line.
Insert the new pump and put everything back in reverse order.
Make sure the dishwasher is level horizontally and vertically.
Other Parts Used:
-
Whit from Pleasanton, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not completely drain e1 f9 error
Pulled the dishwasher out from under counter - removing 2 screws accessible on sides of dishwasher - these screws hold dishwasher under counter. Drain pump accessible right side bottom. Disconnect wiring clip - grab pump turn counter clockwise 1/4 turn and pull out of housing. Then reverse this process for installation
Other Parts Used:
-
Gerould from East Wenatchee, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12741766
Manufacturer Part Number: W11412291
Manufacturer Part Number: W11412291
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST