Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
The tine row is located on the lower dishrack. The tine row can be raised or lowered to provide more room in the lower dishrack. Over time the tine row can become rusted, damaged, or lost, and will ne...
If your dishwasher’s bottom rack is cracked, rusted, or just worn out, this replacement rack is a simple fix. It’s made to fit select Whirlpool, KitchenAid, and other related models, and comes in a gr...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
This replacement heating element is designed to heat water during the wash and rinse cycles in compatible dishwasher models, helping to improve cleaning performance. Positioned at the bottom of the tu...
Is your dishwasher not performing like it used to? It may be the water inlet assembly that needs replacing. We offer you the OEM Water Inlet Assembly direct from Whirlpool, a brand trusted for its hig...
This lower door seal is a flexible rubber gasket designed to create a watertight barrier at the bottom of your dishwasher door, preventing leaks, steam, and detergent from escaping during wash cycles....
$56.90
In Stock
Questions And Answers for KDFM404KPS0
Ask our experts a question about this model and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen
March 21, 2025
The door handle on the front of the dishwasher lost one of the screws so the handle won't stay on. Could you tell me what the part # is? Thank you for your help. It should be covered on warranty and we also bought the five year extended warranty on 9/20/2022.
For model number KDFM404KPS0
Hi Karen, Thank you for reaching out to PartSelect.com. For the warranty you would need to contact Whirlpool as we do not cover the manufacture warranties, just the warranty on parts we sell. The screw for the handle is listed as PS3406943. We hope this helps, good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
RODNEY
February 7, 2026
The dispenser lid often fails to catch when I close it. When I push harder on it, it may close but then won't open. How to troubleshoot?
For model number kdfm404kps0
Hello Rodney, thank you for getting in touch. The issue could be due to detergent buildup. Clean the dispenser latch, use a small brush or old toothbrush dipped in warm water and white vinegar to scrub the dispenser door edges, hinge, and the latch mechanism. Remove any buildup that has hardened. If this does not help, there could be an internal mechanical failure in the dispenser. The internal components of the detergent dispenser are not available as an individual part. You will need to replace the dispenser assembly, part number PS12745376, to fix the issue. We hope this helps.
My dishwasher control panel did not light up. Control panel PartSelect #: PS12745361 however has power and the green light blinks on and off every 2 seconds. Looks like the panel behind the HMI is dead. Whats the part number for this panel?
For model number KDFM404KPS0
Hi JD,
Thank you for your question. The part number for the electronic control board is PS12745361. We hope this helps!
My Kitchen Aid dishwasher door falls open. There is no part matching the description of “spring” or “balance”. How do i fix this problem on this model dishwasher?
For model number KDFM404KPS0
Hi Karim, thank you for contacting us. You may need to replace the right-door hinge, part number PS16660570, and the left-door hinge, part number PS16660571, to fix the issue. We hope this sorts out your problem!
Sounds like plastic gears grinding or clicking from the bottom rear thru most of the cycle
For model number KDFM404KPS0
Hi Bradly, thank you for reaching out. Based on our understanding of the issue, we would suggest that you make sure there are no broken or loose components in the dishwasher. If that is not causing the issue, then you may need to check the pump motor, part number PS12741766, as it might be faulty or it might just be starting to fail. If the pump motor is faulty, you may need to replace it. We hope this helps!
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
After pulling the dishwasher out, I was able to determine the leak was occurring around the plastic nuts on the end of the heating element. I removed the heating element and saw that even though there were washers on the ends that protruded through the backside of the machine, they really weren't sealing the holes the element was sticking through. Looking at YouTube videos on the installation procedure, I noticed the element being installed had a sort of metal grommet permanently affixed to each end and the rubber washers were between the grommet and the dishwasher body. I ordered the new part and saw this to be when I received the new part. This grommet allowed the washer to seal the hole, once the plastic nuts were installed on the backside of the dishwasher. This seems to have stopped the leak. I don't know how the original part ever worked correctly, since the washers freely sat on the element with nothing to force them up against the body of the dishwasher and seal the holes. It may have been leaking long before I discovered the problem.
