Range Surface Element
Fits your JED8430BDS!
$311.67
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your JED8430BDS!
PartSelect Number
PS11764911
Manufacturer Part Number
W10823703
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Jenn-Air, Maytag, Kenmore, Litton.
Part# W10823703 replaces these:
AP6030931, 71003634, 74002151, 74002666, WP71003634, WP74002666
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
one heating element burned out on dual element
disconnect power to range,took top off range turn upside down, remove screws holding element, disconnect wires to element and replace element with new element put every thing back as in reverse order and the range is working fine again.
Other Parts Used:
-
roger from boones mill, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
17 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael Hayes
November 13, 2018
Hello. The front right burner is not working. How to determine if the element or switch is broken. Thanks. Michael
For model number Jed8430bds
Hello Michael, Thank you for the question. You can test both parts with a multi meter and check for continuity. Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jack
March 12, 2019
Should I replace the new epic sensor with the sensor from the failed element? The new element epic sensor has a different terminal arrangement then the failed element. The element sent by parts select has confusing re-wiring `hard- to understand` instructions.
Hello Jack, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Richard
March 28, 2023
Trouble on the right front burner. Continuity checks good on both elements of this burner. Had a spontaneous short the other day in this area when not on and just standing by it, which immediately kicked the breaker. After taking off the glass top no signs of short ( soot, etc ) ... is there a way to check the switch before trying to re energize the system with out taking the complete unit out?
For model number Model JED8430ADB
Hello Richard, thank you for reaching out. According to our research, the issue is probably with the dual surface burner switch kit, part number PS2003583. In order to check the switch, you may need to remove the top panel of the cooktop and disconnect the switch from the wire harness. With the help of a multimeter, you will check the continuity of the switch by placing both probes of the multimeter on the switch terminals. The multimeter will beep if there is continuity in the switch. We hope this is helpful!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11764911
Manufacturer Part Number: W10823703
Manufacturer Part Number: W10823703
Brand
Model Number
Description
Kenmore
62946775693
Range
- Kenmore Range/Stove/Oven Model 629.46775693 (62946775693, 629 46775693) Parts