Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Dishwasher Screw WPY912620
Fits your CDU600B!
$10.09
Special Order
Fits your CDU600B!
PartSelect Number
PS11757599
Manufacturer Part Number
WPY912620
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air, Amana, Magic Chef.
Part# WPY912620 replaces these:
6-912620, 9-12620, Y912620
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Plastic bezel broken
1 - Unlugged power cord.
2 - Reviewed main plastic panel to see where required screws were located.
3 - Removed 8 screws on inside stainless panel.
4 - Separated the loose panel while removing screws holding the front plastic bezel in place. Removed two screws hold latch in place.
5 - Noticed that two screws were holding the PC board down plus a retaining nub on the plastic piece. Removed screws and held PC board out of way.
6 - Pulled off plastic splash shield held down with sticky gunk.
7 - Was a little difficult keeping the front door panel separated from the inside panel while doing all the work.
8 - Installed new handle into latch device and then attached to inside of door.
9 - Put it all back together twice after forgetting to install the two PC board screws. Oops.
10 - Felt confident the repair was correct when done.
Parts arrived as promised. Web exploding details insured exact replacement part.
2 - Reviewed main plastic panel to see where required screws were located.
3 - Removed 8 screws on inside stainless panel.
4 - Separated the loose panel while removing screws holding the front plastic bezel in place. Removed two screws hold latch in place.
5 - Noticed that two screws were holding the PC board down plus a retaining nub on the plastic piece. Removed screws and held PC board out of way.
6 - Pulled off plastic splash shield held down with sticky gunk.
7 - Was a little difficult keeping the front door panel separated from the inside panel while doing all the work.
8 - Installed new handle into latch device and then attached to inside of door.
9 - Put it all back together twice after forgetting to install the two PC board screws. Oops.
10 - Felt confident the repair was correct when done.
Parts arrived as promised. Web exploding details insured exact replacement part.
Other Parts Used:
-
Michael from Silverdale, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
13 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door handle latch broken / front panel broken
Maytag repair man 1 year ago caused most of the damage after I took the front cover off - the repairman broke off most of the screws holding the front panel in place leaving me to replace the front assembly.
The repair was easy - save yourself and do it yourself vs paying someone alot of money to only make it worse in the long run...
The repair was easy - save yourself and do it yourself vs paying someone alot of money to only make it worse in the long run...
Other Parts Used:
-
Kenneth from Cedar Park, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
9 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757599
Manufacturer Part Number: WPY912620
Manufacturer Part Number: WPY912620
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST