Washer Water Inlet and Valve Assembly Specifications
If your washer isn’t filling properly, keeps running water, or has a leak at the back, the water inlet valve might be the problem. This part controls how much hot and cold water enters the machine and helps keep the temperature balanced. It also makes sure the washer doesn’t overfill. Swapping out a worn valve can fix issues like slow fills, leaks, or uneven water temps and get your laundry routine back on track.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Washer Water Inlet and Valve Assembly
Troubleshooting
This part fixes the following symptoms:
Leaking | No hot or cold water | Water Filling Issues
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Russell M - July 30, 2020
Verified Purchase
Great help and right part
The part worked properly and fixed the problem of the stuck cold water intake..Thanks
★★★★★
★★★★★
Deborah S - February 19, 2022
Verified Purchase
Easy repair! I was impressed!
Very pleased with the replacement part. Thank you to the lady who sent me the “how to” video, it made everything so much easier! 10 minutes and my washer was fixed!! A lot cheaper than buying a new washer! Thank you!
★★★★★
★★★★★
CALVIN L - November 30, 2021
Verified Purchase
Fabulous
All great! Especially the how to install video included.
★★★★★
★★★★★
Carl M - March 28, 2020
Verified Purchase
review
the part arrived without delay i repaired the washer and it is now working fine the repair video was of great assistance and if required i will not hesitate to do business with your company in the future thank you carlm
★★★★★
★★★★★
JOAN B - September 23, 2021
Verified Purchase
Very easy to change with the video supplied with email
Washer works as it should now thanks to new part. Saved me cost of new washer.
★★★★★
★★★★★
Harvey G - January 11, 2023
Verified Purchase
Part is perfect. Works perfect.. Thank you.
Part is perfect and works perfect. Thank you. Very much
★★★★★
★★★★★
Martine P - January 11, 2023
Verified Purchase
Good purchase and so good service
Thanks for the good service. I command it and I received it so fast ! It's difficult when you don't have washing machine. Each time I buy from you, I'm so surprised how everything goes well. I like particularly your video demonstration who help us a lot each time. I recommand Part Select to everyone. Sorry for my bad english.
★★★★★
★★★★★
Brenda F - December 13, 2023
Verified Purchase
Quick delivery
Did not take long to replace, machine is working perfectly! Nice to have such quick delivery, so could avoid the laundrymat!
★★★★★
★★★★★
Allan N - February 25, 2019
Verified Purchase
Valve
on time and solved the problem
★★★★★
★★★★★
Connie H - April 28, 2022
Verified Purchase
Great Part
The part was in good condition. It came fast. My washing machine is working great now
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water inlet nozzle was stripped and leak
Remove the front panel and back panel unplug the part unscrewed the part and replace it with the new one
Other Parts Used:
Armand from WESTPORT, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
24 of 50 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hot water valve would barely open - take 35 mins to fill washer
Pull the washer out from wall Unplug the Washer Close the supply line valves Unscrew the supply lines, use bucket to catch line water Remove 1 cover plate for elec lines (1 screw) Remove 2 screws on edge of back plate for control panel Slide long blade under front of control panel corners, pop the lock clips Lay control panel forward - controls down Compare new and old part - looks the same, wires, etc Remove center screw on back plate cover to remove it Unplug the elec wires connecting the valves and the control panel Remove 2 screws holding the water valve outlet swap out the old values for new valves Reverse the process - step backwards and reassemble Took me 36 minutes. Tested the washer for Hot fill and later cold - both work
Other Parts Used:
Kevin from ARLINGTON, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not stop running over filled the washer
Unplugged the washer turned off the water disconnected the water lines then took the cover off and disconnected the wires and took 2 screws out and took the old part out and put the new 1 in
Other Parts Used:
Mary from GROVER HILL, OH
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cold water inlet valve bad
Ordered the inlet assembly from this site. Received it the day after I received the notice it shipped. Watched their video of how to replace the part. Easy job, done in 15 minutes. Only needed a screwdriver to take the cover off the back of the washer control panel. A company wanted $400 to replace the part. Definitely recommend the company and will use again.
Other Parts Used:
Doris from CONCORD, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water inlet valve stopped working
used the Parts.com video. I am not mechanical at all, but removed the old part and installed the new part without a hitch. Very happy.
Other Parts Used:
Zoran from ROCKVILLE, MD
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak into washer drum
Replaced the water inlet valve. Easy install… figured it out on my own, but checked the instructional online video to make sure it was done right.
Other Parts Used:
Richard E from BURKE, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water inlet and valve froze and cracked
Ordered and replaced the water inlet and valve assembly from this site
Other Parts Used:
Donna from MOUNTAINBURG, AR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
33 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Keith Constable
February 12, 2018
Does this come with solenoids?
For model number part w10423125
Hi Keith,
Thank you for your question. Yes, the water inlet valve comes with the solenoids. I hope this helps. Thank you and have a great day!
29 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Larry Dupuy
January 2, 2018
Is there a screen in the water inlet port? My washer has a very low water pressure into the machine. It is not in the water line. Do i need to replace the machine?
For model number RTW4640YQ1
Hi Larry,
Thank you for your question. There are screens in the water inlet valve that catch debris. Sometimes if they become clogged they can prevent the proper flow of water from flowing through them. The screens on the water inlet valve can be damaged easily if cleaned. If the problem is with the screens, you may need to replace the water inlet valve. I hope this helps. Thank you and have a great day!
9 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Lil
October 12, 2017
I bought this washer two years ago am i going to have to replace this every two years
For model number W10683680
Hi Lil,
Thank you for your inquiry. Hopefully not. Sometimes parts can wear out. If your appliance is under warranty the manufacturer may be able to replace it for you. If you are not still under warranty you may order the part from us. I hope this helps. Thank you and have a great day!
8 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Victor
July 5, 2019
Remove part no w10423125
For model number mvwc400xw4
Hello Victor, thank you for writing. We do have an installation video for this part. Here is a link. https://www.youtube.com/watch?v=pYFRzLH4Wl4. We hope this helps.
5 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Ken
December 12, 2018
This four year old washer behaves as follows; any cycle selection, - pushing the start button, the left light lites, the lid log makes a noise and engages, the agitator turns slowly, and then the lid lock disengages. No water flow at all. Checked hoses and filters. Both good. Is this a typical lid latch issue or a water valve issue or is there another problem. The issue(s) have happened over a few weeks, firstly the tub would not fully drain, and now it does virtually nothing except be powered. With the cost of the various parts, it may be cheaper to simply buy new. Certainly cannot afford a repair professiona. However, i would think that a four year old machine would not become obsolete.
For model number MVWC425BW0
Hello Ken, thank you for your question. It sounds like the water valve has failed. The washer should lock, then fill with water. If the water valve isn't opening to allow water to the unit the lid lock will unlatch and the unit will not run. We would recommend replacing the water valve PartSelect Number: PS11757114. If that doesn't fix the issue the water level pressure hose could be kinked, or the pressure switch may have failed which could cause the unit to not fill as well. I hope this helps!
3 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Nicole C
February 7, 2019
Hello, i asked earlier about the washer flashing code f8e1, i was told to check the air pressure tube for damage and i did not see any damage on the tube even blew threw it and didnt feel any air. The inlet valave seems to be in good condition, i dont see any warping or anything like that. When i took the back of the washer off and the removed the drain tube water came out, could there be something wrong with the pump? Or does the code f8e1 only mean the pressure tube and valve? If it helps any the washer goes through the cycle and by the time it gets to spin it will spin once and then the lights turn off but the lock lid light and it makes noises and then that light turns off and the wash light will turn on and just sit there, the clothes are still wet when i open the lid. However the only code flashing is f8e1.Thank you for the help
For model number wtw5000dw0
Hello Nicole, Thank you for your follow up! Next I am suggesting to do a continuity test on the lid switch itself. It is a safety mechanism and if it fails the washer will not spin. It is normal for some water to come out of the drain tube in small amounts however it should not be anything excessive. I hope this helps!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Nicole C.
February 7, 2019
This is just a follow up from my last two questions about my washer. I did check the lid lock and its okay, i can even put the washer on drain and spin and it does just fine. However its still doing what i described in my last message about getting to rinse and then the Green lights turning off and just the lid lock light stays on and i can hear the pump or drain doing something and then the lid light turns off and it goes to wash and just sits there, the same error code is coming up as f8e1. The water is going into the machine just fine as well.....would it just be safe to assume i should go ahead and just get a new pressure hose and replace it incase there is a hole or something wrong somewhere that im not seeing? i just dont want to buy 10 different parts to fix one thing.
thank you for all the help!
For model number wtw5000dw0
Hello Nicole, Thank you for contacting us! The only other things I can think of checking would be PS11752017 2 position selector switch, PS11752020 5 position selector switch, and PS10056798 CNTRL-ELEC. I would like you to test these parts with the multimeter. Good luck with your repair!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Terry
February 12, 2019
Can i replace just the two electronic magnet devices on my washer on the water inlet valve
For model number W10501149
Hello Terry, Thank you for writing. Unfortunately the water valve is only available as a whole rather than individual compartments. Hope this helps!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Kathleen
May 14, 2019
The washer was filling very slowly, so we removed screens and at the time removed some plastic water diverter? Inside water valve, now the washer just keeps filling up and it doesn't stop, and the wash cycle isn't finishing? We are trying to find replacement part for that small plastic thing we took out, please help?
For model number MVWC415EW
Hello Kathleen, Thank you for the question. If the part removed was in the Water inlet valve. The vale will need to be replaced. Hope this helps!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Ralph
January 29, 2018
This washer does not fill with hot water. The hot water inlet solenoid seems to open and close intermittently. Will replacing the water inlet valve assembly solve this problem?
For model number 1105072012
Hi Ralph,
Thank you for your question. Usually if your water inlet valve is malfunctioning replacing it would fix the issue. You can make sure that it is your inlet valve with a multi meter though. I would suggest testing the hot water solenoid of your valve there to be sure. I hope that helps. Good luck with your repair.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
