Has your washing machine stopped draining properly? The trouble could be with your washer drain pump. This simple, yet essential part is the powerhouse that pushes water out of your machine during the drain cycle. Don't worry - we have the genuine Whirlpool Washer Drain Pump that could get your washer back to functioning as good as new! Made with precision, this OEM part is built for optimum performance and longevity. Designed especially for certain models from Whirlpool, Amana, Inglis, Magic Chef, and specific Maytag front-load washers, it ensures a snug fit and smooth operation. When you replace your old, worn-out drain pump with this genuine Whirlpool Washer Drain Pump, you'll be bringing your laundry experience back to its prime. So if you want to bid adieu to half-drained, soggy clothes at the end of a wash cycle, this replacement part could be exactly what you need. Remember, replacing vital parts like these not only helps your washer function as intended but also extends its life, saving you the hassle and cost of total appliance replacement. Be assured that Whirlpool is dedicated to providing you with solutions for your appliance needs. Trust in their commitment and get your appliance back to working like new with this Washer Drain Pump.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WPW10321032 replaces these:
AP6019462, W10321032
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
5 Stars
5
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
DOMINADOR B - June 5, 2020
Verified Purchase
received part on time.
The part is in very good condition and easy to install.
★★★★★
★★★★★
Andy D - August 10, 2018
Verified Purchase
Worked as expected
Perfect
★★★★★
★★★★★
Andrew M - May 29, 2020
Verified Purchase
Easy repair, pricing made it a no-brainer
My washing machine was throwing the dreaded error codes suggesting pump. We tried the clean out the coin catcher approach. Called a service company, they were not keen to enter our house in these COVID19 times and their call out fee was $175. Ordered the part, arrived within 2 days, 15 minutes to install and washing machine is working like brand new
★★★★★
★★★★★
Ivan F - June 1, 2023
Verified Purchase
Drain Pump Replacement
Perfect replacement part. 15 minutes job. Thanks so much.
★★★★★
★★★★★
Richard K - January 14, 2019
Verified Purchase
very easy repair, 15 minutes start to finish
part came in quite fast considering it was ordered in the Christmas break. Simple fix, machine works great again
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 14, 2017
Machine first shows a sud error, I know what this means. Machine clears itself, and then will show error code e01 followed by f09. This is while the machine is running empty. I cleaned all hoses leading to the pump, and also the drain hose. Tried machine, codes still flash. Two technicians looked at this machine saying its fine.. wrong. I installed a new pump... machine still flashes same error codes. All hoses are clean, new pump installed... What is my next step to solving this problem.. New mother board? This is a front end loader. Model # is mhw6000xg1.. When searching this, states incorrect model #.. this is what is on the sticker located behind the door.
For model number MHW6000XG1
Hi Scott,
Thank you for the question. When the washer goes into the drain cycle and the drain time is over 8 minutes and not reaching the reset level in the pressure switch then the drain pump will stop pumping out the water. This means there is a possible issue in the Drain pump, Pressure Switch, or the Electronic Control Board.
Since the pump has already been replaced you will need to look into the Pressure Switch Part number PS11752436 or the board PS6447843.
Hope this helps!
Should the impeller on the water pump have some play “wiggle room” or should it stay rigid with impeller axle? I’ve notice evidence of wear and was curious if the reason my washer wont drain is due to pump impeller damage
For model number Mhw6000xw2
Hello Michael, Thank you for your inquiry. There may be a little room but not very much. If the impeller shows signs of wear, you should probably replace the pump. Hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
