Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeffrey C - August 22, 2019
Verified Purchase
Easy repair great service
Ordered part about 2 pm was on my doorstep at 1030 am the next day. Unbelieveable!!!!!!!
★★★★★
★★★★★
Tom L - April 15, 2019
Verified Purchase
Fast shipping
The part came fast, and was exactly as described.
★★★★★
★★★★★
Rocky B - June 25, 2021
Verified Purchase
Thanks to the online video the repair was extremely easy.
The replacement park works very well, thank you!
★★★★★
★★★★★
Richard S - July 14, 2020
Verified Purchase
Everything was as expected
Got the exact part I ordered, on time. Guess I diagnosed correctly because once installed worked as it should.
★★★★★
★★★★★
RON E - May 1, 2019
Verified Purchase
Perfect replacement part
This part is exactly as ordered. Staff were very helpful during ordering process. Quick delivery. We are very satisfied with our purchase.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
ice maker not making ice
I removed the old ice maker and replaced it with a new one and saved over $150. It was very easy and there is lots of ice now.
Other Parts Used:
Norma from Joppa, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
39 of 64 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ice being made
First i unpluged unit from wall then removed the ice maker front door ,removed side cover with nutdriver 1/4,pressed the in on the the two releas clips on the botom of the unit then pulled the unit out the disconnected the cable.
Other Parts Used:
MATTHEW from NEWPORT NEWS, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
16 of 34 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It wouldn't eject ice cubes .
Removed the 1/4" screw at right rear corner of the ice maker , pushed up on the springy lever on the left front under side and pulled it out far enough to unplug the power connector. This involves prying a tab on the connector so you can get iit apart. Then pulled out the ice maker and reassembled in reverse order. Point started working right away
Other Parts Used:
CHARLES from PATASKALA, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
11 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I ordered, using the internet and no part number, and got the wrong size ice maker
I contacted your customer service. Nicole Allen is super. She helped me through quickly. Got the correct part number and went above the call of duty. She is a credit to your organization. Kudos.
Other Parts Used:
Denise from North Little Rock, AR
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
9 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ICE MAKER WOULDN'T DO ANYTHING
I ordered a new icemaker and installed it. Just one screw on the bottom and it slides out. At first it wouldn't slide(the water tube was holding it) so just a little more pressure and the tube bent to let it slide out. Replaced the slide portion from the old icemaker and put on the new one and slid it back in.
Other Parts Used:
Roger from MURRAY, NE
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
icicles hanging off of ice cube maker. The ice maker still made ice cubes but somehow water must have been overfilling the tray and trickling over and freezing, Tirning into long thin icicles.
Figured that ice forming tray was overfilling. The ice maker has an electrical timer motor and temp sensor built in. Figured something might be wrong with it. Decided to change the unit. It was affordable. I changed it. No more icicles.
Replaced ice maker before so not a bad job. Problem was with the new ice maker from you. Waited a couple days after install n still no ice, contacted you for a replacement and when pulling out your ice maker, it slipped from my hand n broke plastic part when it hit the floor , so I ordered another. I don’t blame you for a bad part which was supplied to you, but you need to say something to the supplier -No ice -Take old one out -Put new one in -No ice -Take that one out -Put another in Oh well, got ice now
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
September 21, 2017
Does instructions come with ice maker.
For model number ed2shaxmq10
Hi Mark, Thank you for the question. We can not guarantee instructions come with the part since everything is pre packaged from the manufacture but in most cases they do come with ice makers. If not, I was able to locate some basic instructions for you. Once you remove the door covering the ice maker you need to slide out the ice bin below the ice maker. Next you will see the screws below and above the ice maker holding it onto the wall of the freezer. Once the screws are removed you can take the ice maker off the interior wall.At the back of the ice maker you will see the wire harness where the ice maker plugs in. Unplug the ice maker and remove from the appliance. As per the manufacturer: the bracket will have to be removed from your old ice maker and reattached to your new ice maker. The cover is not included.Then reverse the steps to reinstall. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Barbara Silver
February 14, 2019
We can't get instructions to install this part. Tried google, Kenmore, chat, phone. Have been trying for over a month. Still buying ice.
For model number wpw10190961
Hello Barbara, Thank you for your inquiry. Unfortunately, we do not currently have installation instructions for this particular part. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
June 5, 2019
My ice maker is leaking causing ice sickles to form. Ice cubes are normal size. Is the ice maker bad or is it possibly the water control valve allowing too much water into the ice maker?
For model number 10656824600
Hi James,
Thank you for your question. Yes, if the ice maker is leaking, then the issue is likely the water inlet valve. You will need to test it with a multimeter to see if it is working correctly. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Don
November 7, 2019
One ice cube will not always drop into the tray and the unit drops water to the bottom of the frig and freezes.
For model number 106.56232400
Hello Don, thank you for your question. This could be an issue with the thermostat, Part #: PS11743313, or the icemaker heater assembly Part #: PS11748649. We would recommend replacing both part. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
April 20, 2018
The icemaker works fine, but it leaks water out of the tray and cascades down on the shelves. I removed, cleaned, and reinstalled the icemaker. It works without leaking for a short while, for example 2 days, but then slowly icicles start to show up on the shelves. It has been two months and it is getting bad again. Will this part fix that problem?
For model number 10656834603
Hello Mike,
Thanks for your question. The most likely cause of this issue would be due to a faulty water inlet valve, part number PS11723179. You may wish to examine the valve for any signs of damage, or if you have a multimeter consider testing the part for electrical continuity. Replace it if it shows no continuity.
I hope this helps.
Ice maker slow making , filling only a couple of the ice slots rest are empty. Have good water pressure coming in.Also the water dispenser is slow,have replaced filter along with the water valve.
For model number Ed2khaxvs01
Hi Jr, Thank you for the question. I suggest checking the water lines,make sure they are not compressed or damaged. They can also freeze up and not allow the water to flow. Make sure all the elbow connectors are secure and not letting air in causing air in the lines.Hope this helps!
Was this helpful?
Thank you for voting!
Chris
March 2, 2018
Need the bracket and ice-maker door as well. Do you guys have these in stock?
For model number 10655206400
Hello Chris, Thank you for your inquiry. The bracket is part# 2212317, and the ice dispenser door chute is part# WP2180353. Hope this helps!
Was this helpful?
Thank you for voting!
Gregory
July 16, 2019
1st ice cubes are 1/2 of normal size. 2nd item is there is a possible leak about the mixing value. 3rd no leak at the value or dispensing water from the door. When we turn off ice maker no leak. What do you suggest?
For model number ED2KHAXVB01
Hello Gregory, thank you for inquiring. For what you are describing, you may want to consider either the Water Inlet Valve part PS11723179, the Single Water Filter part PS11722128, or the Water Reservoir Tubing part PS11751727 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
John
January 28, 2020
Why does the ice maker freeze over about every 3 weeks.
For model number ED2LHAXMQ10
Hi John, thank you for your question. You may need to check if you have a leak in your water valve or if your appliance is too cold. If there is a leak in your valve it is generally very small. So it would be over a period of time that your ice maker would freeze over. Good luck with your repair.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
