Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Door Handle - Stainless Finish Specifications
Handle only. This part is made of plastic with a stainless finish. This is not solid steel.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave.
This part works with the following products:
Maytag.
Part# WPW10187840 replaces these:
AP6016574, W10187840
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Fernando B - May 22, 2019
Verified Purchase
Easy repair
Part ok
Katherine C - August 20, 2023
Verified Purchase
Worked perfectly
It was very easy to repair and saved me buying a whole new microwave
Keith T - September 1, 2024
Verified Purchase
Easy repair
Perfect part, looks better than the original, took 5 min to fit
Les M - March 1, 2019
Verified Purchase
Microwave door handle
Part was as described. Fit perfectly.
Jim M - November 25, 2021
Verified Purchase
As advertised
Quick shipping, little pricey
Lance H - July 2, 2020
Verified Purchase
Worked as expected
The part is the exact fit. Hope it is kept in stock for the future. Hard to find part.
Mike B - June 9, 2023
Verified Purchase
Easy repair, works well
The part was in great condition, installation went well, the appliance works great!
Neil W - August 4, 2022
Verified Purchase
Worked well
As described but no screws to install with
Hanif L - November 7, 2018
Verified Purchase
Instructions for Install
The instructions for the install of the handle very useful and made my repair much easier. Thank you!
Ashley G - July 28, 2020
Verified Purchase
Repair was simple and effective. Handle works great noe
The part came as ordered. Glad I saved the screws though as it came with no mounting hardware at all, just the handle. I will be getting some clear caulking for extra durability, surprised it didn't come with any for the price paid but was shipped and delivered as I was advised. Overall pretty happy with the replacement and will contact this company again if I need other repair pieces.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken handle
Remove the door by lifting up the hinge side so that the two hinge pins disengage from the steel hinge brackets.This can be a bit fiddly so just keep wiggling the door until one of them pops off.
Remove the plastic cover trim piece that surrrounds the window, exposing the phillips head screws that secure the door to the handle.
Remove the screws to un-install the old handle, they are deep set so if they fall out of the door you will need needle nose pliers to pout them back into the door.
Set teh new handle in place and tighten the screws down snuggly.
Retrace your steps... snap the plastic trim back in place and reset teh door on it's hinges (once again this can be a bit fiddly so take your time.
Eat a Burrito!
Remove the plastic cover trim piece that surrrounds the window, exposing the phillips head screws that secure the door to the handle.
Remove the screws to un-install the old handle, they are deep set so if they fall out of the door you will need needle nose pliers to pout them back into the door.
Set teh new handle in place and tighten the screws down snuggly.
Retrace your steps... snap the plastic trim back in place and reset teh door on it's hinges (once again this can be a bit fiddly so take your time.
Eat a Burrito!
Other Parts Used:
-
Raymond from Bishop, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
44 of 53 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Just very easy to do it
Open the door of the microwave and remove the plastic at the door and take the screws off ,and take off the old handle in put your new one screwed back that's it,do you see how Easy it is,like you say hello
Other Parts Used:
-
juvens from N MIAMI BEACH, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749865
Manufacturer Part Number: WPW10187840
Manufacturer Part Number: WPW10187840
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST