MMV5207BAS14 Maytag Microwave - Overview
Sections of the MMV5207BAS14
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Door Handle - Stainless Finish
PartSelect #: PS11749865
Manufacturer #: WPW10187840
This microwave door handle is designed to restore a secure, comfortable grip for opening and closing the microwave door when the original handle becomes loose, cracked, or broken. Featuring a smooth c...
$109.98
In Stock
Cooking Tray
PartSelect #: PS4228146
Manufacturer #: DE63-00383A
This genuine Samsung glass cooking tray provides a stable, rotating surface for even heating inside your microwave. Made from clear, durable glass, it ensures consistent cooking performance and easy c...
No Longer Available
Door Handle - Black
PartSelect #: PS2330325
Manufacturer #: W10189508
Screws are NOT included.
No Longer Available
Mounting Bracket
PartSelect #: PS4233460
Manufacturer #: DE70-00561A
Hardware is NOT included.
$38.18
In Stock
High Voltage Capacitor
PartSelect #: PS1486840
Manufacturer #: 8206562
This is an electronic device that holds a charge of electricity.
$132.45
In Stock
Charcoal Filter
PartSelect #: PS2153981
Manufacturer #: DE63-00367D
Sold individually.
No Longer Available
Common Symptoms of the MMV5207BAS14
[Viewing 5 of 5]No heat
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Exhaust fan not working
Fixed by
these parts
these parts
Show All
Door not closing properly
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken handle
Remove the door by lifting up the hinge side so that the two hinge pins disengage from the steel hinge brackets.This can be a bit fiddly so just keep wiggling the door until one of them pops off.
Remove the plastic cover trim piece that surrrounds the window, exposing the phillips head screws that secure the door to the handle.
Remove the screws to un-install the old handle, they are deep set so if they fall out of the door you will need needle nose pliers to pout them back into the door.
Set teh new handle in place and tighten the screws down snuggly.
Retrace your steps... snap the plastic trim back in place and reset teh door on it's hinges (once again this can be a bit fiddly so take your time.
Eat a Burrito!
Remove the plastic cover trim piece that surrrounds the window, exposing the phillips head screws that secure the door to the handle.
Remove the screws to un-install the old handle, they are deep set so if they fall out of the door you will need needle nose pliers to pout them back into the door.
Set teh new handle in place and tighten the screws down snuggly.
Retrace your steps... snap the plastic trim back in place and reset teh door on it's hinges (once again this can be a bit fiddly so take your time.
Eat a Burrito!
Parts Used:
-
Raymond from Bishop, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
44 of 53 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grease filters were missing from the over-the-stove microwave
Why a tenant would remove and discard the grease filters without replacing them is beyond me! But, I removed the filters from the package and slid them into place. Two minutes tops. I would like to add that I ordered these on Thursday afternoon, and I had them on Saturday; awesome customer service!
Parts Used:
-
Lori from Salt Lake City, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
67 of 133 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not the original type bulb
The repair was very easy, however the bulb was not the same as the original one. The original bulb had a bright setting and a low setting, but the replacement bulb was only the low setting bulb. There was no bright and dim operation. The switch on the microwave had the duel settings.
Parts Used:
-
John from Orlando, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
31 of 40 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!