This part does NOT include the water filter. The water filter is sold separately. The water filter housing holds the water filter and connects the water lines to the water filter.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Refrigerator Water Filter Housing
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ragheed N - June 2, 2021
Verified Purchase
Worked as expected
The part was in very good condition and is working perfectly.
★★★★★
★★★★★
Brendan M - September 11, 2019
Verified Purchase
part works beautifully
I had an issue where the housing was leaking after pulling the filter out. The water would dispense well without the filter but you could hear the filter leak. With a filter in dispensed only a tiny bit of water dispensed. Once I changed out the housing after undoing the connectors in the back from my Kenmore for slack(couldn't pull it forward without it). Press down and then pull for water connectors(don't have to crush em). Make sure you push the connectors in as far they can go then pull to see if secure. At any rate follow the videos online its easy. Nice filtered water and ice now.
★★★★★
★★★★★
L. Brian W - May 7, 2021
Verified Purchase
Great part as expected
Great part as expected
★★★★★
★★★★★
Michael D - May 16, 2019
Verified Purchase
Perfect Part
Huge thanks to PartSelect ... for maintaining an extensive supply of OEM parts, part and appliance assembly diagrams ... just BRILLIANT!!!
★★★★★
★★★★★
D B - December 1, 2022
Verified Purchase
Great part
Shipping was slow. But, the part was at great price ! And my appliance is back in fonction.
★★★★★
★★★★★
Nicholas S - December 1, 2022
Verified Purchase
Part worked as expected.
Part arrived quickly and was able to repair the fridge in 20 minutes. Issue was that after changing the water filter it would not allow any water through the water dispenser. After removing the filter and running the water dispenser it worked fine which narrowed it down to this part being defective. Once the part was replaced and the new filter was added the water dispenser worked just fine. Original part lasted about 12 years.
★★★★★
★★★★★
Mike S - May 8, 2019
Verified Purchase
It was the perfect part no problem whatsoever thank you for that
The part was in excellent condition and it was the housing for the water filter
★★★★★
★★★★★
Beverly W - April 11, 2020
Verified Purchase
Easy repair, great part, good service.
The housing part for the refrigerator water filter was what we expected , easy to fix , and appliance now repaired. Thank you
★★★★★
★★★★★
Kyle M - May 26, 2021
Verified Purchase
Easy repair after diagnosing the problem on Partsselect
It came quickly and I followed the instruction on the video. The ice maker, and water had stopped working. I also had a small leak when I tried to replace the water filter. Turns out the housing was bad. Cheap and easy fix!
★★★★★
★★★★★
K Shane J - February 16, 2022
Verified Purchase
Fast and easy
The part was an exact R&R, moments to install and works perfectly. I will definitely use your company again.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 16 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broke the filter housing,moving the new frig into the house.
Removed all items from frig,put it on its back side,removed metal cover and removed housing screws,hoses.
Other Parts Used:
Joseph from Elkins, WV
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
65 of 101 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water dispenser flow was very slow and the housing leaked when the filter was removed.
Removed front plastic grill and screws holding the filter in place. Also removed lower back cardboard panel to access water lines. Video on this website told me how to remove water lines from filter, you must depress a collar around the water line while pulling out the water line. Then install the new Water Filter Housing and water lines. The only problems I had was the tight space to work in and one of the water lines was leaking, but pushing the water line in further solved the problem.
Other Parts Used:
Daniel from CAROL STREAM, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking filter housing
i did the repair exactly like the instruction VEDIO!
Other Parts Used:
Howard from SANTA CRUZ, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter housing wasn't let the water go through the filter
I got model number off my unit and order the part. That was after trying a lot of different filters first. I did a rush order so I got it in 2 days. Pulled the unit out to shut the water off. Then took the back off so I could take the 2 screws that hold the water value . That way I wouldn't have to go back and forth. Now I went to the front. I already had had the vent cover at the bottom of the unit off. I had a head lap on so to make it easier to see under the unit. Then I use the nut driver or you can use 1/4 inch drive ratchet with sockets. To take the 2 screws out that hold the filter housing. Then lift the spring wire that is on the left side of the release botton. Then push the wire up out of the way. Reach back and pull the water value forward so you have slack in the water lines. Now you can pull the fliter housing out to you. Now release the 2 water lines by pushing down on the rings around the water lines and hold while you pull the water lines out. Now the old water filter housing is free you can set it to the side. I inspected the new filter housing for any deformities and cracks before I started installing. Now I hooked the water lines up by pushing them into the right size spring ring hole. Once lines was all the way in I pulled back on the water lines to make sure they were locked in place. Then I put a new water filter in and turned the water on to make sure of no leaks. Then I put everything back together in the reverse order I took it apart. Then I check the spicket to make sure everything was working right. After that I was able to push the refrigerator back in and then wipe everything up and I was done.
Other Parts Used:
DANIEL from DAVENPORT, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both the ice maker and water dispenser in the door were not getting water.
I first replaced the water valve, but that did not correct the problem. I then replaced the filter, but still no luck. In the end, it turned out to the the water filter housing was malfunctioning and not letting water through the filter when the filter was installed (it did let water through when the filter was removed, however). I replaced the water filter housing and all worked well once again. The filter housing is not difficult to replace. The hardest part is figuring out how to remove the hoses from the filter. Just push the hose in while holding the plastic ring around the outside, then pull the hose back out.
Other Parts Used:
Grady from LYONS, OR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Well, somehow when I replaced the water filter I turned and don’t suppose to so, it did started licking.
First, I watched the video the sale agent sent it to me. Then I decided to do it myself, I’m a 62 woman that I like to show myself how smart we are as a human being, thanks God! It took me less than 30 minutes to make it work!!!!
Needed to replace the Refrigerator Water Filter and Water Filter Housing
I watch the video and it was easy as pie 1,2,3 and I was done in know time flat...Thanks for everything I'd recommend these how to do videos to anyone they will save time and money on all your appliance repairs!
removed 8 screws 3 hose connections and done....hardest thing was getting up from the floor!!!
Other Parts Used:
CHARLES from SAND ROCK, AL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water from filter housing
Followed the directions from the video and almost everything went great. The toughest part of the repair was removing the push button cap from the old housing.
Other Parts Used:
Dennis from SPRING HILL, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water pressure from the dispenser was just a trickle even after replacing the filter.
I followed the video on this site. It was a pretty easy repair. Unplugged the fridge and turned off the water. Took off the bottom front panel. Used a nutdriver to remove the nuts holding the old filter housing in place. Unhooked the metal hook shown in the video. Disconnected the water from the old housing and removed it. The water line was a little short but I was able to reach in far enough to disconnect it without having to disconnect the line from the back of the fridge. Then I just reconnected everything to the new filter housing and installed a filter. Once I turned the water back on and plugged the fridge back in, it had better pressure than it ever has. Just watch the video and follow along.
Other Parts Used:
Marika from MEDFORD, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim Phillips
January 29, 2019
Water dispenser suddenly started filling very slowly. Changed the filter still very slow fill. Removed the filter and it flows great but i noticed water leaking out the filter housing outlet. Replaced the filter and again very slow fill. Do i need to replace the filter housing? Again without the filter great flow so it seems the switches and valve are ok.Thanks.
For model number c
Hello Tim, thanks for your question! We would recommend changing the filter housing, as changing the filter did not fix the issue and ruled out the filter being the problem. It is most likely an issue with the connection to the water filter in the housing. We hope this helps, and good luck with your repair!
17 people found this helpful.
Was this helpful?
Thank you for voting!
James
March 13, 2019
Every few days my water dispenser slows and i get a pulsating sound. I can fix it by removing and reseating the filter. But then it comes back in a few days. Also the filter takes a lot of pressure to seat and sometimes unseats on its own. Could this part fix my problem?
Hi James,
Thank you for your question. If the water filter is not seating correctly in the housing, replacing the housing may help. I would check first to make sure that housing you have now is fitted correctly in the refrigerator and not causing the issue. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
December 6, 2017
Replaced water filter and no water comes out of dispenser.Removed new filter and notice water leaking from filter housing ports. Removed housing cleaned ports with air to blow out any foreign material. Reinstalled housing and filter, still no water come out of dispenser. I already replaced inlet valve.
For model number ed5vhexvq02
Hi Joe,
Thank you for your question. I would suggest then checking your micro switch in your dispenser area. You can test that part with a multi meter to be sure. If that part is also fine, the problem may lay with your dispenser control board. I hope that helps. Good luck with your repair.
When removing the filter to replace it, should any water be spraying within the housing? If it is, would this mean housing is bad and that is why dispenser is very slow with water and making ice?
For model number ED5LVAXWB05
Hello Gordon, Thank you for the question. The Housing should Auto Bypass so not water should be spraying or leaking while changing or removing the filter. We recommended replacing the Housing. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
GABRIEL
August 30, 2021
Water housing leaks. Id like to replacement
For model number PS11748615
Hello Gabriel, Thank you for reaching out to us. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
December 9, 2017
No water at the dispenser with the filter installed. I replaced it with a new filter and there is still no water. It works fine with the filter removed [bypass filter]. Do I need a filter housing?
For model number ED5VHEXVQ06
Hello Gary,
Thanks for your question. There are a few parts to consider beforehand. First, test the water inlet valve with a multi-meter for continuity and replace it if it shows no continuity. See if the water lines are frozen and if they are receiving sufficient pressure as well. We would also advise checking the door switches for continuity, as they can cause the dispenser to not dispense water if they fail.
I hope this helps.
Unable to remove water filter from the housing! Can't get the button to release.
Hello Paul, Thank you for the question. If the filter button will not release, You may have to remove the housing for the filter to open it up and get the filter out. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rodney
January 21, 2019
When I pull the filter out, water pours out of the back of the tube. No water pressure when dispensing water. Dispenses very slowly.
For model number ED2NHGXVQ01
Hello Rodney, Thank you for the question. It sounds like the filter, PartSelect Number: PS11722128 may need to be replaced. Hope this helps, good luck with this repair!
When water is dispensed at the door in addition to the slow flow, there has been a buzzing noise. This happened also with the installation of a new filter.
For model number ED5FHAXst00
Hi Ed, thank you for your question. Usually when you are having an issue like that it is best to check the water filter for any dirt or debris that could be in the top. Otherwise you might have to look at your water inlet valve for being the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chuck
August 26, 2023
I just replaced the water filter housing (whirlpool part # w10121138). I reconnected each water line, but the smaller one (not the one from the inlet valve) came loose and I do not know where/how to reconnect it.
Please reply and advise.
Thank you.
For model number ED5KVEXVB00
Hello Chuck, thank you for reaching out. To reconnect the water line, you may need to insert your water line into the port firmly, until the water line fits tightly. We have also attached a relevant video that may help you with the installation of the water lines. We hope this helps, good luck with this repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
