Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Whirlpool EveryDrop3 Refrigerator Water Filter EDR3RXD1
Does this part fit my model?
Need help finding your model number?Whirlpool EveryDrop3 Refrigerator Water Filter Specifications
How Buying OEM Parts Can Save You Time and Money
Replacing your Kenmore Refrigerator Whirlpool EveryDrop3 Refrigerator Water Filter
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- 2
- 3
- Next >
-
Kate from Jacksonville, FL
-
Difficulty Level:Very Difficult
-
Total Repair Time:30 - 60 mins
-
Leroy from Perkiomenville, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Victoria from Beaverton, OR
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Kenneth from SAn Francisco, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Baerbel from Jacksonville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
The upper spray arm has screws on the top of the dishwasher. You must slide the dishwasher out from underneath the countertop to get to the screws. Normally that's just the two screws above the door that screw into the countertop. Pull the insulation back and unscrew the arm from the top of the dishwasher. Reverse to reinstall.
Piston and nut assembly for check valve: Inside the dishwasher at the back there are 2 screws that hold a screen down. Remove the screen. Take out the check valve and replace it. It was still functional in mine, it looked like food gunk had built up on it and impeded the check valve action.
The flapper chec is a rubber flap in the drain tube that connects to your sink drain. You have to pull the dishwasher out from under the sink to get to the end of the drain tube that connects to the dishwasher. Take the hose clamp loose and remove the drain tube from the dishwasher. Then unscrew the plastic fitting that you just took the drain tube off of. The flapper chec is there. It had turned brittle and didn't flap anymore. It is a similar setup to the rubber seal at the end of your garden hose.
-
Aaron from Liberty Township, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
-
Leslie from Nipomo, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Roy from The Villages, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Scott from Fort Lauderdale, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
-
Debbie from Tyler, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
- < Prev
- 1
- 2
- 3
- Next >
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
38 people found this helpful.
30 people found this helpful.
19 people found this helpful.
19 people found this helpful.
18 people found this helpful.
10 people found this helpful.
9 people found this helpful.
7 people found this helpful.
6 people found this helpful.
6 people found this helpful.
- < Prev
- 1
- 2
- 3
- Next >
Manufacturer Part Number: EDR3RXD1
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST