This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Range Infinite Switch
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Oven is too hot
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Admiral, Amana.
Part# WP9758060 replaces these:
AP6013982, 9758060
Customer Reviews
Average Rating:
★★★★★
★★★★★
60 Reviews
4.9
Filter By Rating:
5 Stars
54
4 Stars
6
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chad R - March 20, 2022
Verified Purchase
Easy repair
Quick delivery. Right part.
★★★★★
★★★★★
Andrew C - February 24, 2022
Verified Purchase
Part was exactly what I needed and installed no problem
Fast, shipping and part was exactly one I needed to get my stove back operating normal thank you
★★★★★
★★★★★
Romel E - February 21, 2020
Verified Purchase
GREAT PART
DELIVERED ON TIME , ORIGINAL PRODUCT, WORKED PERFECT
★★★★★
★★★★★
David V - April 13, 2023
Verified Purchase
The part is an exact replacement
All of the connections were the same as the old part. Has been working well since it was installed.
★★★★★
★★★★★
Collin A - October 11, 2023
Verified Purchase
Good Part
It's working now, great, Thanks a lot
★★★★★
★★★★★
Allan M - February 17, 2023
Verified Purchase
great part video was super
What a wonderful company p[art works great and video helped I just followed direction and the problem was solved the burner works perfectly now this is the second time I have dealt with this company great service always
★★★★★
★★★★★
Lloyd E - February 26, 2019
Verified Purchase
correct part
even though the switch had no picture the other picture of the switch was not the right one and cheaper, so went with the more expensive one on listing, voila was right switch, this switch is for the double burner, the old switch went turned low would run at high and stay there , now the burner if working perfect again. Saved me from having to buy another stove saving me at least 1500.00. Will use partselect again.
★★★★★
★★★★★
Leah H - October 29, 2021
Verified Purchase
Problem solved
Burner staying on high continuously. Quick part replacement,problem solved!
★★★★★
★★★★★
Victor A - November 24, 2022
Verified Purchase
Very satisfied
Easy to find on side and follow instructions. 5 stars. Thank you
★★★★★
★★★★★
Randy B - August 23, 2023
Verified Purchase
Infinite switch
Old element was on high no matter what setting. New switch arrived in couple days. Easy install. Works as it should.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
burner would immediately go to high and stay there no matter what temp setting was selected
unplugged the range, removed 5 screws from the back cover and removed the knob and two screws holding the switch to the range. oriented the new switch to the old one and changed over the wires one at a time to the new switch, reattached the new switch to the range plugged the oven back in to test new switch and reassembled
Other Parts Used:
Peter from Myerstown, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
17 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alan
September 6, 2017
Is this the dual control switch for this model?
For model number GR448LXPT0
Hello Alan, thank you for contacting us. Yes, this is the switch that controls the dual element. Good luck with the repair!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
January 19, 2018
Is this the part I need if my element stays on high no matter what temperature you put dial on?
For model number GR448LXPS1
Hello Mary,
Thanks for your question. Yes, the most common reason as to why it would remain on high is due to the switch. We would advise replacing it.
I hope this helps.
11 people found this helpful.
Was this helpful?
Thank you for voting!
John
November 13, 2017
Is this the correct switch for a dual burner? Original part # says it is 3148951? Thanks
For model number GR448LXPB2
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS11747215. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Jaime
July 29, 2019
First, the right side single burner/element does not work after turning it on. What is the replacement part number and video link to replace it. Second, the right side dual burner/element turn on, but always in high (cannot be lowered). Again, what is the replacement part number and video link to replace it? Where can I buy these parts in Calgary, AB, Canada?
For model number WERC4101SQ0
Hi Jaime,
Thank you for your question. The part number listed under your model number for the right rear single burner element is PS11764915. Here is a link that contains information on the part and a video that you may reference on how to install it, https://www.partselect.ca/PS11764915-Whirlpool-W10823711-6-Element-with-Limiter-1200W.htm?SourceCode=3&SearchTerm=PS11764915. If the right front dual element goes immediately to a high temperature, then the issue is the burner switch, part number PS11747215. Here is a link to the part which also has a video on how to access the switch, https://www.partselect.com/PS11747215-Whirlpool-WP9758060-Infinite-Switch.htm?SourceCode=1&SearchTerm=WERC4101SQ0&ModelNum=WERC4101SQ0&ModelID=855324. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Pat
March 5, 2019
Message on stove says e1 f1, expected power surge. What part # would i need and what is the cost?
For model number GR563LXSS1
Hello Pay, thank you for your question. The most likely issue is the board itself. The E1 F1 error code is in relation to the control board. If unplugging the unit and leaving it for about 2 minutes doesn't reset the unit please replace the electronic board Part Number: PS11748478. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Clyde
November 27, 2018
Is this the correct switch that controls the right side dual burner element?
For model number GR563LXSQ0
Hello Clyde, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS11747215 for the Dual Burner Switch. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
October 30, 2017
Thanks for the quick answer regarding my dual element problems. But, can you provide instructions for testing the infinite burner control switch and the element? Thanks
For model number GR563LXST0
Hi Mike, Thank you for the question. You can test the watts with a multi-meter. First unplug the power to the range, remove the upper back panel to access the switches, remove the black wire attached to the P2 terminal, turn the switch to the highest temperature setting, then check across the empty P2 terminal and terminal 4 (brown/black wire) then test between P2 terminal and terminal 4A(brown/white) wire. Both test should have "closed" circuits on the meter, if not the switch is at fault. If both tests have "closed" circuits then the element is at fault or there's a broken wire between the switch and element. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jonathan
April 9, 2022
My front left dual burner on my whirlpool stove goes to high heat. Do I need to replace the infinite dual switch? If so then what is the part number please. Thanks and have a great day!
For model number GERC4110PQ1
Hello Jonathan, thank you for writing. The issue would be the Dual Infinite Switch PS11747215. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Saeid
March 9, 2024
What is the part # of temperature switch for this model
For model number GERP4120SS0
Hello Saeid, thank you for getting in touch. The left front and right front infinite switch for your model have the same part number PS11747215, and the right front and right rear infinite switch have part number PS11740785. If you need help placing an order, customer service is open 7 days a week!
Double checking that part PS11747215 is the dual zone infinite switch for my model number.
My dual zone burner only goes to high heat no matter what the dial is turned to (other than off).
For model number GERC4110PQ2
Hello Bryan, thank you for contacting us. Yes, this is the switch that controls the dual element. Good luck with the repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
