GERC4110PT0 Whirlpool Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8009
$26.41
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(47)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Dual Surface Element - 2500w/1200w – Part Number: W10823692
$258.05
In Stock
Dual Surface Element - 2500w/1200w
★★★★★
★★★★★
(78)
Part #W10823692
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and heats up the area directly above it. You will need to replace the element if it does not heat up properly. As you will be working around electricity, be sure that your range is disconnected from power before you begin this repair. This is an OEM part sourced directly from the manufacturer.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Oven Sensor – Part Number: WPW10181986
$112.60
In Stock
Oven Sensor
★★★★★
★★★★★
(52)
Part #WPW10181986
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.
Element with Limiter 6 Inch - 1200W – Part Number: W10823711
$231.78
In Stock
Element with Limiter 6 Inch - 1200W
★★★★★
★★★★★
(40)
Part #W10823711
This 6-inch, 1200-watt radiant surface heating element is a genuine replacement part designed for select ranges. It supplies consistent heat to the designated cooking zone on the stovetop, ensuring even heat distribution for reliable cooking performance. Compatible with Whirlpool, KitchenAid, and other associated brands, this OEM component replaces faulty elements that no longer heat or heat unevenly. Installation should be performed with the appliance unplugged or the circuit breaker turned off. Protective gloves are recommended to avoid injury. Replacing a worn or malfunctioning element helps restore full functionality and cooking efficiency to your range.
Infinite Switch – Part Number: WP9758060
$87.90
In Stock
Infinite Switch
★★★★★
★★★★★
(60)
Part #WP9758060
This switch controls the stove top surface burner.
Range Safety Thermostat – Part Number: WP3196548
$48.47
In Stock
Range Safety Thermostat
★★★★★
★★★★★
(12)
Part #WP3196548
This part is used as a safety feature. If your range overheats this part will shut the range down.
Range Single Drawer Roller – Part Number: 814229
$60.26
In Stock
Range Single Drawer Roller
★★★★★
★★★★★
(2)
Part #814229
Used to slide the broiler drawer open and closed.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Range Insulation – Part Number: WPW10208653
$69.24
In Stock
Range Insulation
★★★★★
★★★★★
(9)
Part #WPW10208653
Oven Wrap Insulation.
SOCKT-LITE – Part Number: W11594027
$97.21
In Stock
SOCKT-LITE
★★★★★
★★★★★
(15)
Part #W11594027
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the back of your range, so in order to access it you will need to remove the back panel. Many of our customers have rated this repair as easy, and it should take less than 15 minutes. Before you begin this repair, make sure to disconnect the power source from your range. This is an OEM part sourced directly from the manufacturer.
Infinite Control Switch, 6" – Part Number: WP3149404
$63.75
In Stock
Infinite Control Switch, 6"
★★★★★
★★★★★
(11)
Part #WP3149404
If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid ranges. Easy to install—just be sure to unplug the appliance or flip the breaker first. Sold individually.

Manuals & Care Guides for GERC4110PT0

Click to download

Common Symptoms of the GERC4110PT0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Right rear burner went bad
155 of 190 people found this instruction helpful.
  • Mark from Loxahatchee, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Was this helpful?
Thank you for voting!
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
171 of 261 people found this instruction helpful.
  • GEORGE from NEWNAN, GA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
Was this helpful?
Thank you for voting!
mice had made nests in the insulation wrap in the range
129 of 211 people found this instruction helpful.
  • Wendy from Red Hook, NY
  • Easy
  • More than 2 hours
  • Screw drivers
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Was this helpful?
Thank you for voting!