Part Location Diagram of WP9708175 Whirlpool Planetary (Metallic Chrome)
See part 3 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

customerservice@partselect.ca

Planetary (Metallic Chrome) WP9708175

★★★★★
★★★★★
5 Reviews

Rated by 3 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$87.95
  In Stock

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11746991
Manufacturer Part Number WP9708175
Manufactured by Whirlpool
Product Description

Planetary (Metallic Chrome) Specifications

Used with stand mixers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP9708175 replaces these:
9703430, 9706303, 9707977, 9708175, 9708715, 9709206, W10513719, WP9707977, WP9708715
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 3 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Planetary Drive shaft broke in two.
The old planetary unit dropped out when it broke leaving the upper part of the broken shaft and beveled gear in the motor housing. Removed label band and upper motor housing with phillips screwdriver. Removed beveled gear housing with phillips screwdriver and pulled out broken shaft. Used snap ring pliers to remove gear retaining ring and slid gear off broken shaft and pressed out retaining pin below gear. Put seal and o-ring on new shaft and inserted new planetary unit up into bearings and reinstalled pin and snap ring. Greased top end of shaft and reassembled gear housing and motor housing. The unit works better than before as the upper part of old shaft had never been greased. The new drive shaft is much stronger than the original which had a deep groove cut around it which weakened the shaft where it broke in two.
Other Parts Used:
  • John from Rockport, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Planetary
Self explanatory lol
Other Parts Used:
  • Yevgeniy from Newbrugh, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Teeth in planetary stripped where shaft seated
Removed cover, removed retaining clip from shaft. Removed gear, removed shaft pin. Removed shaft. Installed new planetary and installed pin, gear, retaining clip. Installed covers. Tested Sat.
Other Parts Used:
Mixer Retaining Pin
  • ROBERT from BEAVER, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Janet
October 20, 2021
The planetary on my mixer dropped down about 1/4”. Part number 9708036. Do I need to replace this to fix the problem. I have ordered a worm gear which will be here tomorrow.
For model number 4KV25HOXMC
PartSelect logo
Hello Janet, Thank you for the question. If the Gear did not fix the issue, we suggest checking the Lower Gear Case for wear or damage as well. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Fang
February 7, 2023
I have to replace the planetary (9708036). Does this planetary part (PS11746991) fit?
For model number Kitchenaid KP26M9XCCU 6 quarter
PartSelect logo
Hi Fang, Thank you for your question. Part number PS11746991, is contour silver. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Wael
September 6, 2017
Do you have this item in stock
For model number Planetary Whirlpool Part Number 9708175
PartSelect logo
Hi Wael, Thank you for your inquiry. Yes, this part is in stock. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746991
Manufacturer Part Number: WP9708175
Brand
Model Number
Description
KitchenAid
4KB25G1XBU5
Mixer
KitchenAid
4KB25G1XBY5
Mixer
KitchenAid
4KB25G1XCO5
Mixer
KitchenAid
4KB25G1XER5
Mixer
KitchenAid
4KB25G1XGA5
Mixer
KitchenAid
4KB25G1XMC5
Mixer
KitchenAid
4KB25G1XMY5
Mixer
KitchenAid
4KB25G1XOB5
Mixer
KitchenAid
4KB25G1XTG5
Mixer
KitchenAid
4KB25G1XWW5
Mixer
KitchenAid
4KD2661XMC3
Mixer
KitchenAid
4KG25G0XMC4
Mixer
KitchenAid
4KG25G0XWH4
Mixer
KitchenAid
4KG25G7XER4
Mixer
KitchenAid
4KG25G7XOB4
Mixer
KitchenAid
4KG25G7XSL4
Mixer
KitchenAid
4KG25G7XWH4
Mixer
KitchenAid
4KG25H3XER5
Mixer
KitchenAid
4KG25H3XOB5
Mixer
KitchenAid
4KG25H3XSL5
Mixer
KitchenAid
4KG25H3XWH5
Mixer
KitchenAid
4KN15C1XER1
Mixer
KitchenAid
4KN15C1XMC1
Mixer
KitchenAid
4KN15C1XOB1
Mixer
KitchenAid
4KN15C1XWH1
Mixer
KitchenAid
4KP26M1XBS4
Mixer
KitchenAid
4KP26M1XBS5
Mixer
KitchenAid
4KP26M1XBY5
Mixer
KitchenAid
4KP26M1XDP4
Mixer
KitchenAid
4KP26M1XDP5
Mixer
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

Contact Customer Service