Dishwasher Stationary Wheel And Mount Specifications
Sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid.
Part# WP8268785 replaces these:
AP6012257, 8268785
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
5.0
Filter By Rating:
5 Stars
10
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marlene G - April 3, 2019
Verified Purchase
Easy replacement part
All was great..replaced the part easily and dishwasher rack slides again thanks
★★★★★
★★★★★
Karl K - December 21, 2018
Verified Purchase
Painless
Parts arrived within 24 hours. Took me less than 10 minutes to install the pair.
★★★★★
★★★★★
Michael O - October 16, 2019
Verified Purchase
Easy repair
The part worked great easy to install
★★★★★
★★★★★
Florence B - April 16, 2021
Verified Purchase
Ordering was easy
The part came quickly and I was able to change it by myself. Thanks for the how to instructions
★★★★★
★★★★★
Bruce W - June 2, 2019
Verified Purchase
Dishwasher Part
Part came fast - easy fix. Dishwasher rack back working
★★★★★
★★★★★
Shirley S - January 26, 2020
Verified Purchase
Stationary wheel mount
Perfect easy to install very satisfied
★★★★★
★★★★★
Irene L - December 7, 2022
Verified Purchase
Dishwasher rack repair
The wheel and mount went on as expected. Now dishwasher rack is all fixed up.
★★★★★
★★★★★
Michael M - June 29, 2019
Verified Purchase
Perfect fit - super fast shipping
Part fit perfectly, smooth roller action.
★★★★★
★★★★★
Stephen K - February 11, 2019
Verified Purchase
Easy fix
Great replacement but very expensive
★★★★★
★★★★★
John C - February 17, 2021
Verified Purchase
Great customer service..
Easy repair..worked as expected. Ordered by phone, excellent communication. Called your company after 7 week battle with a previous supplier, and got the proper response. Thank you!!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 10 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wheel on top rack broke
In less than 5 minutes, we removed the stopper on the end of the arm that held the top rack, slid off the top rack, rotated off the broken wheel assembly, rotated on the new one, slid the rack back on, and replaced the stoppers.
Other Parts Used:
Polly from Powell, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
34 of 40 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel mount broke on right side of top shelf. Shelf not supported.
I order a pair of wheel mounts and replaced both. Squeezed ends of plastic "plug" on the front edge of each rail (top shelf) and removed plug. slid out top shelf, snapped off old whell mounts, snapped on new wheel mounts, slide shelf back into track and re-inderted end "plugs". Done!
Other Parts Used:
Warren from Wantagh, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
14 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic bracket broke holding rack up
part was easy snapped into rack holding the rack in tact.
Other Parts Used:
carol from Sebastian, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the bracket the holds the basket broke and would not move in or out, I orderd the part in the morning and received the part the next morning FED X
I removed the old broken bracket and click on the new bracket it took me about 2 minutes to do. I was very pleased with the service. I am a single woman and was able to repair the part my self (Horray)
Other Parts Used:
Christine from Thousand Oaks, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel mount was broken
Husband removed a small piece at the end of the upper tray frame and slid new wheel mount on. Clicked it into place and replaced end piece. Very pleased to save expense of a house call and delay that would have been required while part was ordered.
Other Parts Used:
Margaret from Las Cassas, TN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the wheels just fell apart from all the heat and chemicals
pulled the ends off the top rails--pulled the top tray out--set it up on its back end--replaced the wheel mounts by threading them through the sides of the tray--returned the tray to the machine and replaced the ends
Other Parts Used:
Cynthia from Lynchburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels on top rack were broken
Removed rubber stoppers from arms on top rack of dishwasher. Pulled out and removed top rack from dishwasher Took off old wheels and replaced with new wheels on rack. Ran wheels into arms of dishwasher and replaced rubber stoppers. Done.
Other Parts Used:
James from Brooklyn, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken wheel mount
I just popped of the end cap, removed the old part and installed the new. Very easy!
Other Parts Used:
Cindy from Hattiesburg, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very difficult to figure out install
First, to do this correctly and easily, you should remove the end clips holding the upper tray and remove the tray. To do this, you must pull the clips from the side and install those clips the same way-slide in from the outside. Otherwise if you try to pull the clips straight out you could break the clip. To install the new part, I struggled with how to do this for almost an hour. The key is to slip the roller thru the area where it is to be installed and hook one side to the tine on the lower left then carefully move the entire part up, being sure to have the left part of the unit positioned so that it also sits as intended. There should be a UTube for this part, or it should be sent with instructions. Very frustrating..
Other Parts Used:
Ira from ROCKVILLE, MD
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cheap asian import dishwasher
Replace sheet parts with more sheet parts.
Other Parts Used:
Paul from Suwanee, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William Murphy
February 6, 2019
I have a KitchenAid dishwasher. The upper dishwasher rack wheels pull out from the bracket that holds the top rack. I assume that i need to replace the four upper dishwasher wheel part no. 8268785. The replacement looks straightforward. However, i am not sure how to get the end cap off and then back on. Can you help me with this? Thanks.
For model number KUDP01DLWH6
Hello William, Thank you for your inquiry. Upon reviewing the part I show that in order to remove the track end cap, you would use a flat blade screwdriver to press the tabs on the inside of the track, then remove the stop. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
March 6, 2020
Part # ps11745464 our rack keeps pulling out of the f-shaped track in the part which holds onto the rack. In your 2nd picture, that's the left end of the part. We can push the rack back into them but after a wash or 2 they pop out again especially when there weight, that is, a load of dishes in it. Doesn't look like anything is broken? Your thoughts? Thx
For model number KUDPO1DLBS6
Hello and thank you for writing.
It sounds like the plastic parts might have become faulty due to the heat of the dishwasher, they might not show any damage that would be obvious, but they still might have bend and that could be causing these symptoms. You should consider changing those parts, but do inspect them for damage such as being slightly bent. We hope this information helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ron
July 14, 2021
Does bracket support arm go on vertical or horizontal? Where should bracket be placed on tray?
Hello Ron, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Rich
October 18, 2021
The wheel of the wheel assembly you sent is too small. The one I need is 1 and quarter inches in diameter.
For model number KUDK01IL
Hello Rich, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11745459. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Jim, Thank you for the question. Once the Rack is removed from the Appliance the Wheel and mount just clip or snap onto the Dish Rack. To remove you just need to snap the Mount off the Rack. We hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/Dishwasher-Wheels-and-Rollers.htm"},{"position":2,"name":"WP8268785","title":"WP8268785","url":""}]
