Range Infinite Burner Switch - 8 Inch Specifications
This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Range Range Infinite Burner Switch - 8 Inch
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Whirlpool, Maytag, Admiral, Jenn-Air.
Part# WP7403P239-60 replaces these:
AP6011291, 7403P372-60, WP7403P239-60VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
20 Reviews
4.8
Filter By Rating:
5 Stars
17
4 Stars
2
3 Stars
0
2 Stars
1
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Eric T - May 9, 2020
Verified Purchase
Easy Repair
Delivery was very fast. Exact matching part. Easy install.
★★★★★
★★★★★
Jacob G - October 8, 2025
Verified Purchase
Worked as expected.
Looks like the exact same part from my older Maytag stove. Fixed the issue.
★★★★★
★★★★★
Roy A - June 27, 2019
Verified Purchase
Came quick, installed easily, works like new
Just as advertised
★★★★★
★★★★★
Boris R - November 3, 2018
Verified Purchase
Great Part - worked as expected.
The part came fast. Thought its installation was not as easy as described in video - it was difficult to remove the control panel, even after all screws were out.
★★★★★
★★★★★
H Joseph H - November 5, 2018
Verified Purchase
True to their word.
Very efficient service and on time delivery. The part works great and was an easy repair.
★★★★★
★★★★★
John K - December 8, 2022
Verified Purchase
Easy site to navigate and helpful people
Great people make great companies….question answered promptly, correct part shipped fast. Lots of instructions for installation. Keep up good work!
★★★★★
★★★★★
Ralph B - September 1, 2021
Verified Purchase
Easy Repair on an Older Stove
The part came quickly and the repair was easy….exactly like the defective rheostat.
★★★★★
★★★★★
Michael P - December 19, 2020
Verified Purchase
Worked as described
Perfect fit, stove now working.
★★★★★
★★★★★
Constantin P - June 3, 2020
Verified Purchase
Part was installed and works fine
Delivery was fast and the part was I great condition stove works like new
★★★★★
★★★★★
David F - March 25, 2024
Verified Purchase
Perfect fit
Part was an an exact fit and shipping was extremely fast. Great company.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 11 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner switch would not regulate heat
Turn off breaker in electric panel fore stove. Put screw driver into slots in front of glass top surface. Pry top up carefully until top pops up.Remove burner dial, remove two philips head screws holding switch. Lift top carefully and prop up.With new switch close remove wires from old switch one at a time and place on new switch. Place new switch back in place, securing with philips screws. Remove prop and carefully press top down until it snappes into place.Replace dial, turn breaker back on and try burner.
Other Parts Used:
JACK from FRANKLINVILLE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burnner would go to high setting no matter what the setting was.
Shut off power at breaker box , pull stove away from wall , remove Phillips screws from back of range pull knob off of switch . Look to see how switch is oriented remove 2 screws that hold switch in . Remove one set of wires at a time and place on new switch in same location . Put back together in reverse order .
Other Parts Used:
Neal from MONROEVILLE, IN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner control switch stuck on High
Pull out the range...hardest part. Remove back panel. Remove/install switch PS, This is second switch I had to replace. Try making them in the United States.
Other Parts Used:
John from NACOGDOCHES, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front 8" burner stuck on high no matter where dial was set.
This range was easy. Only 4 screws under the front panel that allows the panel to come off. No need to pull the range out for back screws.
Replacement part was exact and worked perfect.
Turn off the circuit breaker for the range.
Remove the 4 screws under the front panel, one on each end and one one each side of the display/control panel.
Pull the bottom of the front panel out about 30 degrees and lift off the top.
Once panel is off pull of the dial knob, remove the two screws for the control and swap wires on at a time with the new one.. Reverse the procedure and all is good. You may need to use needle nosed pliers on the spade connectors if they are too tight to pull off by hand.
Other Parts Used:
Dale from SAINT PETERS, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light would stay on all the time saying burner was on although it wasn`t
unplugged power took the back panel off unplugged the 5 wires removed knob by grabbing and pulling off took two screws out of front panel removed the switched put new switch in place and reversed the procedure went very smooth know problem at all any one with any kind of ability should change this switch in know time at all
Other Parts Used:
Joseph F Gott from FELTON, DE
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven gasket was worn out and front left burner only worked on high setting
After watching a couple of YouTube videos, I removed the old oven gasket and installed the new one. I then pulled the range out from its cubby, unplugged the power whip, and removed the upper access panel. After confirming that I had the correct replacement switch, I removed each wire separately and attached each to the new switch. I plugged the power cord back and tested the burner. It worked perfectly! I put everything back and I was back in business.
It turns out that the 6" and 8" burners we actually broken and the infinite switch for the 8" burner was not working properly. These we very simple replacements. You just need to note the numbers on the original burners to make sure that you use the same numbers on the bottom of the burners so that they install in the same slots. The wires on the infinite switch match and this takes less than 5 minutes to remove the back of the stove top and the front switch handle. Simple replace the infinite switch and the burners and whoowhooo ,,.... the fix is done.
Large burner was surging indicating infinite switch failed
Changing out the switch was easy. Paid attention to wire connections to avoid mixup. Removal and installation of the switch was easy. It's the back panels that gave me the most challenge. Used screwdrivers and needle nose pliers to do repair. Having a second set of hands for the two part back panel reinstall was most helpful, but can be accomplished by 1 person. Burner works great. This is a easy DIY fix.
Other Parts Used:
John from CENTERVILLE, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
could not regulate element
replaced control
Other Parts Used:
Billy from LE ROY, WV
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner swith not working properly
removed 4 screws lifted off the face with switches replaced the bad switch and put the face plate back on. if you have any concerns just watch the video , part select has posted its great
Other Parts Used:
leland from CARTHAGE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
19 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Curtis
September 6, 2017
Our 8 inch burner heats ok but at times will go to full heat and no control unless you turn the knob off. Is this the limiter causing it to overheat?
For model number MER5752BAQ
Hi Curtis,
Thank you for the question. Sounds like you will need to test the limiter on the element. To test the limiter with a multi meter, you will test from 1a to 2a and at room temp there should be continuity. If there is no continuity the element is defective. If it tests good then you will need to replace the switch that controls the element.
Hope this helps!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
November 22, 2021
RF 8" burner goes full hot at times. Sometimes a click and cools off other times you have to turn burner off and start over. Sometimes works fine. Is this the Infinite Limit or the switch that controls the element. If it is the switch I don't see it in the parts list (but do see in schematic).
For model number AER5712BAZ
Hello Thomas, Thank you for the question. This is normally an indication the Switch, PartSelect Number PS11744487 that controls the element is faulty and will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Samuel
August 14, 2017
Indicator light remains on after burner switch is turned off, which switch needs to be replaced 8" or 6" switch?
For model number MER6769BAW
Hi Samuel,
Thank you for your inquiry. First, disconnect power form your appliance when doing any repairs. On the side that the light is on, both your switches have a "P" terminal. Be very careful when doing this. Unplug the wire from the "P" terminal from one of your switches and see if that turns the light off. If the light stays on you will know that you have to replace the switch your did not unplug. If the light shuts off, you will know that the switch you have to replace is the one you unplugged. If you feel that you are unable to do this repair, I would recommend contacting an appliance repair technician to help you out. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
January 13, 2018
I have a 6" element switch out. I am not sure if I have the right part number. Wp7403p239-60
For model number MER6765BAB
Hello Bill,Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11744486,Manufacturer Part Number WP7403P238-60. Hope this helps!
I have a 6" burner that burned out, so i replaced it. The new burner would only give me high or off. Thinking the part bad, i replaced it with another burner, but with the same results! Now i'm thinking the infinite switch or whatever. I don't have schematics for the stove.
For model number mer6872baw
Hello Larry, Thank you for your inquiry. It could be the switch, the 6 inch switch is part# WP7403P238-60, you can test it with a multimeter to see if it has continuity. It could also be the wiring as well, so check the wires for any visible damage. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jose
November 15, 2017
The front right 8" element is out of control, from high heat to low or medium without touching the dial. I see wires running from the 8" to the 6" infinite switch and each have different part numbers. The 8" 7403p669-60 and the 6" 7403p373-60 which should be replace? The 8" switch in my range is blue and the 6" white. If not a Jenn-Air part, is there another brand that can replace it? I'll appreciate your help!
For model number JER8855BAS
Hi Jose,
Thank you for your question. For an 8" element, you would have to replace the 8" switch. You would not be able to properly run that element with a 6" switch. I hope that clears this up for you. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Randy
December 17, 2017
Stove top works only thing on control panel is the time no other functions appear
For model number mer6872baw
Hello Randy, Thank you for you inquiry. It sounds as though the electronic control board is not functioning properly. You can test the part with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
January 12, 2018
I have a 8" burner that expands to 10" with a push of a button. The burner switch shorted out and i am not finding a replacement switch. Can you help? It is the double oven model.Ser# 108f1563le
For model number MER6765BAB
Hello Bill, Thank you for your inquiry. The part number for the switch for the dual burner is WP74003122. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Anh
November 29, 2019
I have changed the switch of the 8" burner of a Maytag range ( i don't know the model number,but i found "part no. 8119p316 60" on the control circuit diagram of the range. Is it helpful )then i found it doesn't produce enough heat like before.This happened could it be because i installed the switch of 6" burner instead of the switch of 8" burner.If this is not the case,how can i fix it.
For model number Part no. 8119P316-60
Hello Anh and thanks for writing.
If this the correct switch does not improve the symptom you might have to replace the elements themselves. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 20, 2019
Does this infinite switch 7403p372-60 replace 7403p524 infinite switch
For model number mer6770aaw
Hi Mike, thank you for your question. This: 7403p524, unfortunately is not a part number. However this part that you have questioned underneath is the correct part according to your model number itself there. Which is what you always want to go by when looking for parts. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
![](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/12348164-1-S-Whirlpool-W11171119-6-amp-quot-Surface-Element-1200-W.jpg "6" Surface Element, 1200 W – Part Number: W11171119")
