Whirlpool WP358237 - Agitator Bolt | PartSelect.ca
Agitator Bolt – Part Number: WP358237
Agitator Bolt – Part Number: WP358237 https://partselectca.azureedge.net/Schematics/Maytag/TEBJZIYW.gif

Agitator Bolt

3 Reviews

Your Price

CAD$6.23

PartSelect Number PS11741866
Manufacturer Part Number WP358237
Manufactured by Whirlpool

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral, Magic Chef.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms: Will not agitate, Noisy, Pumps but will not spin, Shakes and moves.

Videos For installing this part.

Questions & Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 4.0 / 5.0, 55 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dexter from Milwaukie, OR
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WPW10072840, 285753A, WP3951744, WP389140, W10814296, WP358237, WP3363394, 285744
Washer made a loud banging noise at end of spin cycle, leaked water and agitator seemed loose
After entering the model number of your appliance you will be taken to a page where all of the parts are displayed by sections. On that page about in the middle there is a heading called "Find Part By Symptom." I figured out from there which symptom the washer had and read what other people were saying and how they made the repairs. Basically I had three problem areas, Noise, Leaking and a problem with the agitator. I focused on the loud noise first and decided I needed to replace the clutch/brake assemblies. I found the clutch parts page and on that page there was a video on how to make this repair. This video is all you need to gain access to all moving parts located under the cabinet. Which ever part you are replacing, I recommend watching this video! After removing the console, back panel and cabinet then laying the machine on its back just as seen on the video, I had access to the water pump, motor, transmission and related clutch/brake parts. As it turned out I did not need the clutch/brake assembly but as a precaution and because the parts were cheap, I replaced the motor coupling, water pump and tub wear pads. I decided to replace the agitator assembly because of several worn parts associated with the dog ears/drive shaft ETC. I put the machine back upright and took off the top cap on the agitator, then there is an inner cap with seal that gives access to the 7/16" bolt you must remove to remove the agitator. However once the agitator was removed I noticed metal shavings and play in the shaft. I used a spanner wrench to remove the spanner nut. I removed the Plastic Tub Ring (has several clips around the outer tub), then removed the inner washer tub to replace the Drive Block. Replacing the Drive Block stopped the loud noise at the end of the spin cycle. Now just reverse the order to put the machine back together and your done. For my situation it was best to take the machine apart and decide which parts I needed before ordering to minimize errors. These machines are made very cheaply and are designed to brake at some point in time and it is very easy to determine which parts are worn because most are made of plastic. In this process I also noticed where my leaks (did I say Leaks) were coming from. There were two hose clamps installed improperly from the factory, so check all clamps, hoses ETC. and you should be good to go.
457 of 534 people found this instruction helpful.
Was this instruction helpful to you?
Michael from Claremont, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Parts Used:
WPW10072840, WP9724509, WP358237, WPW10119828, WP3363003, 285811
Top part of agitator (auger) was not turning
Using kit 285587 was straight forward. Removed fabric softener dispenser & sealing cap. It took more time to find the socket set (needed a 7/16 socket) with a long driver (10 inch) than to unscrew & remove the auger & agitator.
Cleaned up the bowl whilst it was apart (good buildup of junk under the agitator). Replaced agitator, new thrust washer to find that grease should be applied but isn't included in kit (get part not 350849). Grrr.... Applied new auger, cam, dogs and holder. (No instructions in kit for assembling cam, dogs & holder, but you can work it out ok). Applied new bolt & washer, new seal on cap. Installed fabric softener. Could have been a 15 minute job but peace and quiet in the garage makes it worthy of taking longer ;-)
163 of 186 people found this instruction helpful.
Was this instruction helpful to you?
Raymond from Speedwell, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WP358237, WP3363003, 285811, 285587
cam dogs worn out and the agitator wouldn't rotate.
Removed softner dispenser on top of agitator. Removed next was cap and seal cover at base of the agitator by just pulling it up. Used 1/4" drive w/ 7/16" socket w/long extension to remove the agitator mounting bolt. While holding the bottom of the auger, pull the agitator up, removing the top agitator assembly. Replace the necessary worn parts. Read the directions which came with your ordered parts. Also, the agitator grease which you are to use to lube the top of the Thrust washer is not included in the repair kit. You can use non water soluable grease to lube the thrust washer or order part number 350849. Total time, 15 minutes. Happy washing...
30 of 705 people found this instruction helpful.
Was this instruction helpful to you?
peggy from johnston, RI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
WPW10072840, WP358237, 357574, 285811, 285587
agitator top not working
Repair was very easy for me and I have three fingers missing on one of my hands. Video on repair was also very detailed. I ordered three extra parts that were already included in the agitator kit. Would have been nice if all parts were listed that came in the kit and add a small tube of the grease. Delivery time was great! I would order from this company again, I was very pleased. I have already referred a friend to the site for her repairs.
24 of 699 people found this instruction helpful.
Was this instruction helpful to you?
Eric from Saint Petersburg, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WPW10072840, WP358237, 285811
Upper agitator not working
Read the directions in the repair kit first- a 7/16" socket and 10" extension is needed. Assembled new dogs on agitator "cup" and retainer, added marine(waterproof) grease to assembly washer, replaced bolt anyway and installed new o ring. Took less than 15 minutes-READ ALL DIRECTIONS FIRST!
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Ernie from Beaumont, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
WP358237, 350849, WP3363003, 285811, 285587
The teeth on the one-way clutch of the upper part of the agitator were stripped.
The directions that came with the parts were very helpful.

1. Removed the softener dispenser.
2. Removed the bolt at the bottom of the exposed agitator.
3. Pulled up the agitator assembly.
4. Installed new parts.
5. Reversed process.
17 of 351 people found this instruction helpful.
Was this instruction helpful to you?
PATRICIA from ORINDA, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
WP358237, 350849, 285811
Agitator wasn't working
I'm really impressed with this website. I was able to quickly diagnose the problem with my machine. I watched the video and thought that this was something that I might be able to do myself. I'm a woman and I like to understand how things work and do my own repairs when I can. My machine is over 16 years old, so I had to scrape some waxy-like buildup from the inner cap before I could remove it. Other than that, I followed the instructional video, which was excellent. I found that I did not need the inner cap seal that I had ordered because a new one was included in the agitator repair kit.
15 of 19 people found this instruction helpful.
Was this instruction helpful to you?
David from Barrington, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WP358237, 285565
Washer's Agitator wasn't working
Basic replacement so easy my nine yr old daughter did the needed repair we watched the video on your web site Way to go Alexis . Ten minutes later all done ! Probably saved a few hundred dollars or more, no service calls or no need to replaced our beloved washer (Cira 1994) they really don't make them like this anymore, will use your company again if needed Thanks !!!
13 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thomas from Troy, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WPW10074580, WPW10072840, 80040, WP358237, 357574, WP3355758, WP3348752
Upper Agitator & cogs wore out
I pulled the cap and took a socket wrench turned the stud agit off and removed the upper agitator. Than I assembled the new agitator with the new clogs put the agaiator back on and tightened the stud agit. Replaced new cap and done! Easy job!! Everything is working like new again. This whirlpool washer is 14 years old and still going strong!
13 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Whiteman AFB, MO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WPW10072840, WP3951744, WP358237
Upper agitator would not turn
First I removed the fabric softener dispenser. I removed the inner cap seal and agitator retaining bolt. Then I firmly pulled up on the agitator to remove the complete agitator assembly. I replaced the inner cap seal and installed the new agitator bolt with rubber washer. I placed the new agitator assembly on the drive shaft and tightened the bolt. Lastly I installed the inner seal and the fabric softener dispenser. The total time spent was around 10 minutes.
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
3 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
106.82872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
110.1050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
110.2071299
Washer - Kenmore Washing Machine Model 110.2071299 (1102071299, 110 2071299) Parts
Kenmore
110.2086299
Washer - Kenmore Washing Machine Model 110.2086299 (1102086299, 110 2086299) Parts
Kenmore
110.2371220
Washer - Kenmore Washing Machine Model 110.2371220 (1102371220, 110 2371220) Parts
Kenmore
110.2882790
Washer - Kenmore Washing Machine Model 110.2882790 (1102882790, 110 2882790) Parts
Kenmore
110.29802891
Washer - Kenmore Washing Machine Model 110.29802891 (11029802891, 110 29802891) Parts
Kenmore
110.828918100
Washer - Kenmore Washing Machine Model 110.828918100 (110828918100, 110 828918100) Parts
Kenmore
110.828918110
Washer - Kenmore Washing Machine Model 110.828918110 (110828918110, 110 828918110) Parts
Kenmore
110.828918120
Washer - Kenmore Washing Machine Model 110.828918120 (110828918120, 110 828918120) Parts
Kenmore
110.828918130
Washer - Kenmore Washing Machine Model 110.828918130 (110828918130, 110 828918130) Parts
Kenmore
110.8293130
Washer - Kenmore Washing Machine Model 110.8293130 (1108293130, 110 8293130) Parts
Kenmore
110.92093320
Washer - Kenmore Washing Machine Model 110.92093320 (11092093320, 110 92093320) Parts
Kenmore
110.92093720
Washer - Kenmore Washing Machine Model 110.92093720 (11092093720, 110 92093720) Parts
Kenmore
110.92293510
Washer - Kenmore Washing Machine Model 110.92293510 (11092293510, 110 92293510) Parts
Kenmore
110.92570200
Washer - Kenmore Washing Machine Model 110.92570200 (11092570200, 110 92570200) Parts
Kenmore
110.9281100
Washer - Kenmore Washing Machine Model 110.9281100 (1109281100, 110 9281100) Parts
Kenmore
110.98762790
Washer Dryer Combo - Kenmore Washer/Dryer Combo Model 110.98762790 (11098762790, 110 98762790) Parts
Kenmore
110.9975820
Washer Dryer Combo - Kenmore Washer/Dryer Combo Model 110.9975820 (1109975820, 110 9975820) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer