Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Agitator Cap WP3355758
$14.07
In Stock
Does this part fit my model?
Need help finding your model number?PartSelect Number
PS11741199
Manufacturer Part Number
WP3355758
Manufactured by
Whirlpool
Product Description
Agitator Cap Specifications
This is the cap for your agitator.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer, Washer Dryer Combo, Dishwasher.
This part works with the following products:
Whirlpool, Roper, KitchenAid, Estate.
Part# WP3355758 replaces these:
AP6008070, 3347663, 3348376, 3352098, 3355712, 3355758, 3355759, 3355760, 3355761, 3388571, 3428527, 62947, 63911
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Deborah H - December 15, 2022
Verified Purchase
no need to get a new washer!
I recently thought it was time to get a new washer/dryer. A piece on agitator had broken off. But then I looked in the manual and found it as just an agitator cap, so I ordered one from PartsSelect for a very reasonable price, and it fixed the problem perfectly. Also, the part arrived two days after I ordered it. You can't ask for better service!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 8 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The old lint filter was worn, and would "pop up" so that clothes weren't being moved about during the wash and rinse cycles. If I didn't frequently push it down again, it would fly off during a spin cycle. Dangerous!
I simply lifted the lint filter and its cap off, pressed the new agitator cap onto the new lint filter and put the assemblage into place. No tools needed at all. A $50 dollar repair saved me from replacing my washer/dryer! I'm very pleased.
Other Parts Used:
-
Virginia from Philadelphia, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
39 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Agitator & cogs wore out
I pulled the cap and took a socket wrench turned the stud agit off and removed the upper agitator. Than I assembled the new agitator with the new clogs put the agaiator back on and tightened the stud agit. Replaced new cap and done! Easy job!! Everything is working like new again. This whirlpool washer is 14 years old and still going strong!
Other Parts Used:
-
Thomas from Troy, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
16 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top portion of agitator wouldn't turn.
First I removed the top cap on the agitator, then I removed the second cap inside the agitator. I moved the agitator with my hands and saw that the "dog ears" were worn and no longer touched the agitator and couldn't move it. I then used a nut driver to remove the nut that held the top portion of the agitator onto the bottom portion. I made a note of the worn parts, got online at PartsSelect.com and ordered the replacement parts. A few days later the parts arrived and I repeated the above process in reverse using the new parts. It now works like new!!! It wasn was very easy. Thanks!!!
Other Parts Used:
-
Michael from El Segundo, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint Filter/Upper Agitator - 11-1/4 inches long broke free
just switched the parts it was a no-brainer
i did not need to replace the stud
i did not need to replace the stud
Other Parts Used:
-
ROBERT from LOMBARD, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old agitator would fly off during spin cycle due to broken tabs
I just lined up the tabs with the slots on the spindle and it snapped right on with small amount of pressure. The cap also snapped right on. Might as well replace the cap for and extra 6 bucks if you have to replace the agitator.
Other Parts Used:
-
ken from ROHNERT PARK, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old agitator kept coming out
-
Edna from WEST HILLS, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to put the agitator back on every load.
Took off the old agitator and put the new one on, then placed the cap on top and pushed down really hard until it clicked
Other Parts Used:
-
Cynthia from WINCHESTER, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Repair went well!!!
Repairs went well.....it took less than 10 mins...just followed picture diagram....and test....and it worked well>>>.
Other Parts Used:
-
Michael from Bakersfield, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741199
Manufacturer Part Number: WP3355758
Manufacturer Part Number: WP3355758
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST