Drum Baffle - Short WP3403636

Hello John, Thank you for your inquiry. Remove the door and front by taking out the screws with a Philips head screwdriver. Some of these may also attach the door to the hinges, so once you have those screws out, you can lift off the door. Then using the Philips screw driver, remove the screws that hold the bulkhead to the front of the dryer. Now you should be able to remove the screws that hold the top on-you may need a nut driver or socket wrench for that, then lift up on the main top. Rotate the drum until you can access the screws that hold the baffle on and you should be able to tighten them. I have included a link to a repair video for a similar part to assist you. Hope this helps! https://www.youtube.com/watch?v=wHjMrZ2UrF8&t=0s&list=PL812EFA28A01FA86A&index=2

Hi David, Thank you for your question. If there is a bad smell coming from the dryer and vent and you have already removed lint from the lint trap and vent, we would recommend checking the thermostats, the motor, and the belt to see if one of these parts is causing the issue. You should also check burner assembly as well. We hope this helps!

Hi Kimberly, Thank you for your question. If the baffles appear to be worn and rough and your clothes are getting caught and damaged because of them, they will need to be replaced. The part number for the tall drum baffle is PS11743769 and the part number for the small drum baffle is PS11741670. Here is a link to one of our YouTube videos that you may reference for information on how to install a drum baffle. The dryer in the video may not be the same as yours, but it will give you a general idea on how to install the part. We hope this helps!