Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP34001248 replaces these:
34001248, DC62-00142D
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Donald O - May 26, 2023
Verified Purchase
Water valve replacement
The representative I spoke with was excellent in helping me with my order. The part was easy to install and worked as expected. My problem was with delivery. We were charged for delivery to our house which never occurred. We had to drive 1 hr. and 15 min. Round trip to pick up the part. Purolator is the company you use and I would think twice about using your service in the future if I saw they came up on the order as the delivery company. I would be interested in your response to this situation
May 27, 2023
Hello Donald, thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The cold water would not shut off. (many diff. error codes)
1. Unplug the machine. Take off the cold water line from the machine.
2. Take out the two screws from top back to remove top.
3. Unplug the three electrical connectios from the valve sylenoids.
4. Take off the two screws that hold the three way valve to the machine back.
5. Unclamp the three clamps and remove the hoses from the valve end.
6. Place the hoses and clamps on the new valve.
7. Reincert the three electrical connectioins.
8. Secure valve in place with the two screws from above step 4.
9. Replace top and secure with two screws from step 2.
10. Connect cold water line. Plug machine in.
11. Done.
PS. There is a diagram of the connections on top of the distribution center.
2. Take out the two screws from top back to remove top.
3. Unplug the three electrical connectios from the valve sylenoids.
4. Take off the two screws that hold the three way valve to the machine back.
5. Unclamp the three clamps and remove the hoses from the valve end.
6. Place the hoses and clamps on the new valve.
7. Reincert the three electrical connectioins.
8. Secure valve in place with the two screws from above step 4.
9. Replace top and secure with two screws from step 2.
10. Connect cold water line. Plug machine in.
11. Done.
PS. There is a diagram of the connections on top of the distribution center.
Other Parts Used:
-
James from Promont, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
31 of 40 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Because of sand in my well water,the valve quit working properly and water would run constantly
I removed two screws on the back of the washer,removed the top of the washer unclipped three plastic wiring clips, removed two screws holding the valve in place.replaced valve and replaced wires and top of washer. Total time about 15 minutes
Other Parts Used:
-
Robert from Monticello, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741549
Manufacturer Part Number: WP34001248
Manufacturer Part Number: WP34001248
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST