Whirlpool WP22001187 - Upper Fill Injector | PartSelect.ca
Upper Fill Injector – Part Number: WP22001187
Upper Fill Injector – Part Number: WP22001187 Upper Fill Injector – Part Number: WP22001187 Upper Fill Injector – Part Number: WP22001187 https://partselectca.azureedge.net/Schematics/Maytag/53035.gif

Upper Fill Injector

1 Review

Your Price

CAD$41.94

PartSelect Number PS11739271
Manufacturer Part Number WP22001187
Manufactured by Whirlpool

This upper fill injector is five inches long. It is white, made of plastic, and is intended for use with some washing machines.

This part works with the following brands: Maytag, International, Jenn-Air.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms: Leaking.

Questions & Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 3.6 / 5.0, 9 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
AMY from Mount Kisco, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
Parts Used:
WP22001187, WP22001186
Plastic thing (Fill Injector) that puts water in the washer broke
Unfortunately, I couldn't find instructions for removing the top for exactly this model. First step was to remove the front panel by removing the two lower screws, grabbing the bottom of the panel, and lifting up until the clips on top of the panel let go. Next was removing from underneath the two screws towards the front that held the top of the washer on. This gives you easy access to the Fill Injector, but if working alone you'll need something to prop up the front of the top lid while you work on it. There is one screw that hold on the Fill Injector assembly (top and bottom). This screw is removed from the top, via the control panel. To get inside the control panel you need to remove the back of the control panel (very easy), just unscrew the 5 screws on the back of it. Then remove the one screw that holds the Fill Injector assembly in place. From under the front panel, use your pliers to remove the hose clamp and then remove the Fill Injector from the hose. ONE IMPORTANT ITEM, YOU'LL DEFINITELY NEED A REPLACEMENT HOSE CLAMP. The one you remove to take off the old, broken fill injector cannot be put back on. Put the new clamp loosely on the hose, then connect the hose to the new Fill Injector Assembly. Put the Fill Injector Assembly in place and use a piece of duct tape to hold it there. Then reinstall the screw that holds it in place from the top, inside the control panel. Reinstall everything in reverse, give it a test and then have a beer. You've just "given it to the man" and saved yourself $100+ on a repair bill.
16 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Gregory from Louisville, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
22001190, WP22001187, WP22001186, WP596669, WP489503
leaking water under back left of washer
The first thing I did was look at the diagrams for my specific appliance on the parts select web site to locate fastners. I removed the front panel(2 screws 4" from floor on front panel), then removed the corner bolts of top panel(found under in front). Next I removed the 4 screws on the control panel (on top). I located the screw holdling the fill injector to the top Lid. Then I removed the clamp holding the unit to the regulator. Assembled the unit and placed it in position. First attaching the fill injector to top panel, then clamping the hose to regulator, then replacing 4 screws in control panel. Next the two corner screws in corners under the top panel. Replaced front panel and 2 screws. Then had a trail run and no water leaks any where.
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Henry from Southside, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WP22001187, WP22001186
Upper and lower filler injectors broken
Power cord out, of course.Popped off the front panel, swinging bottom outward. Wedge shaped protrusions on top of front panel work as a hinge until the bottom is swung out and the entire front lowered. Unscrewed the top--one screw in each front corner accessed from the front opening (removed panel). Panel behind control panel must be removed (5 hex head screws). Tilted front of top up revealing broken injector. Retaining screw for injector accessible from behind control panel loosened and broken injector assembly removed. New (easily assembled--snap together) injector slid into holding slot on one side and screwed down with previously removed hex screw. Reassemble in reverse.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Daryl from Newton, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WP22001187, WP22001186, WP596669
Upper and Lower Fill Injector snapped off and water was leaking out of the back of the machine
I looked at the machine diagram on the website and removed the screw on the bottom and lifted up the from panel which allowed me to have easier access to the fill injector. Then I removed the back panel off of the control panel on the top of the machine and removed the screw that held the fill injector in place, attached the new fill injector using the hose clamp I ordered with the part ( you need a new hose clamp because the other one is useless after you remove the old injector). Tightend up the screw to hold the injector in place and replaced the back panel and front panel. It was an easy repair and only cost $28.00 with shipping. I easily saved $150.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Coudersport, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP22001187, WP22001186
Overloaded my washer and broke the water-injector!
Had to look up how to pop the front panel off the washing machine - that was the hardest part. Once that was off, the top unbolted and the cover came off the back of the control panel with a few screws. Tilting the washer-top back, I was able to clip the new upper and lower injector (attached to each other in advance) to the washing machine. Then I realized that I needed to clamp the water line to the injector FIRST - so I found a small screw clamp and attached the water line. One screw and one plastic tab hold the injector in place. Everything went back together fine and worked great! Maytag washer keeps on truckin for another ten years!
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
David from Cumberland, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WP22001187
Water was overflowing inside the washer and coming out bottom.
First I removed the two screws that held the front washer panel in place. Then I removed the two bolts that held the top on the washer. I then had to remove the four screws that held the top panel with the electrical parts in place in order to obtain access to the inside area where the screw was that held the fill injector was located. I next removed the screw that held the fill injector unit in place. I then pulled on the tab that held it in place and moved unit into a better place to replace the fill injector. I had previously cut the hose clamp during my investigation of the problem and replaced it with a pressure clamp. I then unscrewed the clamp, removed the bad fill injector and replaced with new fill injector. I then reversed the entire process to reassemble. The whole process turned out to be easier than I thought! The hardest part was diagnosing the problem in the first place.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Todd from Evansville, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WP22001187, WP22001186
Fill Injector Broke - A mouse may have contributed
I opend up the housing, found the broken part, ordered it, installed it, and had the washer working within 4 days of the initial break down.
Saved a lot of money over a service call, as well as time, and trips to the laundramat.
1 person found this instruction helpful.
Was this instruction helpful to you?
Jim from The Woodlands, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
22001693, WP22001187, WP22001186
Timer not functioning properly
Turned power off, unscrewed back panel with nut driver, disconnected wiring harness and removed old timer and replaced. Reversed process.
1 person found this instruction helpful.
Was this instruction helpful to you?
Jason from Palm Harbor, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
WP22001187, WP22001186
Plastic Fill injector broke. Water was leaking.
Used the Butter knife to push in the clips on the front panel of the washing machine. Remove the two screws from the top. Remove the metal plate on the back. Lifted up the top and unscrewed the old Fill Injector and removed hose. Connected new Fill Injector to hose with new hose clamp. Attached Fill injector with screw to top of washer lid. Replaced all screws. Checked for leaks. Good to go!
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Maytag
6329
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6349
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6359
Washer - MAYTAG AUTOMATIC WASHER
Maytag
LAT1916AAE
Washer - Residential
Maytag
LAT1916ABE
Washer - Residential
Maytag
LAT2200AAE
Washer - Residential
Maytag
LAT2300AAE
Washer - Residential
Maytag
LAT2300AWW
Washer - Residential
Maytag
LAT2301AAE
Washer - Residential
Maytag
LAT2500AAE
Washer - Residential
Maytag
LAT2600AAE
Washer - Residential
Maytag
LAT2914AAE
Washer - Residential
Maytag
LAT2914AAL
Washer - Residential
Maytag
LAT2914AAM
Washer - Residential
Maytag
LAT2915AAE
Washer - Residential
Maytag
LAT2915AAM
Washer - Residential
Maytag
LAT2916AAE
Washer - Residential
Maytag
LAT2916AAM
Washer - Residential
Maytag
LAT2916ABE
Washer - Residential
Maytag
LAT3500AAE
Washer - Residential
Maytag
LAT3500AAQ
Washer - Residential
Maytag
LAT3600AAE
Washer - Residential
Maytag
LAT3600AAQ
Washer - Residential
Maytag
LAT3914AAE
Washer - Residential
Maytag
LAT3914AAL
Washer - Residential
Maytag
LAT3914AAM
Washer - Residential
Maytag
LAT4000AAW
Washer - Residential
Maytag
LAT4914AAE
Washer - Residential
Maytag
LAT4914AAL
Washer - Residential
Maytag
LAT4914AAM
Washer - Residential