Whirlpool WP215581 - Agitator Shaft Spring | PartSelect.ca
Agitator Shaft Spring – Part Number: WP215581
Agitator Shaft Spring – Part Number: WP215581 Agitator Shaft Spring – Part Number: WP215581 Agitator Shaft Spring – Part Number: WP215581 https://partselectca.azureedge.net/Schematics/Maytag/37311.gif

Agitator Shaft Spring

Your Price

CAD$6.46

PartSelect Number PS11738926
Manufacturer Part Number WP215581
Manufactured by Whirlpool

Sold individually.

This part works with the following brands: Maytag, International, Jenn-Air.

This part works with the following products: Washer, Washer Dryer Combo.

Questions & Answers
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 2.8 / 5.0, 1 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Richard from Alexander City, AL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WP215235, WP596669, WP215581, WP215233
Agitator Not Woking
Unplugged power cord then disconnected the water supply and drain hose. Removed 2 screws and took the front panel off. Laid washer on it's side and posistioned the transmission with the cover facing upward. Removed the hex head screws then used a razor knife and a putty knife to remove the silicone sealant. Found that the agitator shaft spring had broken and fallen into the housing jamming the gears that's used in agitation. Removed the oil and all broken pieces of the spring. Installed new shaft spring, replaced the oil then applied sealant to the cover and screwed the cover back down. Let the washer stay in the same posistion for about 18 hours to let sealant dry completely. Then I sat the washer back on it's feet and removed 2 screws that holds the top lid in place. This allowed me access to the tub cover where the injector t is located. Installed the injector t along with the injector tube seal. Connected the hose and hose clamp. Then I put the lid back down and secured with the screws. Connected the water supply and drain hose then the power and selected a wash time and observed the operation. Everything worked ok so I put the front cover back on. Note: I had used the injector t from this washer to fix another washer that an appliance dealer had given me to use for parts to repair the one just described above. That was the only thing that was wrong with it. It was used for about a year and a half and it developed a problem in the spin cycle. Appears to be a brake problem. I intend to repair it as well.
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?

Model Cross Reference

Brand
Model Number
Description
Maytag
6329
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6349
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6359
Washer - MAYTAG AUTOMATIC WASHER
Maytag
A104
Washer - Top Loading
Maytag
A105
Washer - Top Loading
Maytag
A112
Washer - Top Loading
Maytag
A183
Washer - Top Loading
Maytag
A190
Washer - Top Loading
Maytag
A1910
Washer - Top Loading
Maytag
A211
Washer - Top Loading
Maytag
A211S
Washer - Top Loading
Maytag
A212
Washer - Top Loading
Maytag
A212S
Washer - Residential
Maytag
A23CDL
Washer - Commercial
Maytag
A23CDW
Washer - Commercial
Maytag
A25CA
Washer
Maytag
A25CAE
Washer
Maytag
A25CM
Washer
Maytag
A25CME
Washer
Maytag
A25CS
Washer
Maytag
A25CT
Washer
Maytag
A26CA
Washer
Maytag
A26CAE
Washer
Maytag
A26CD
Washer
Maytag
A26CDC
Washer
Maytag
A282
Washer - Top Loading
Maytag
A283
Washer - Top Loading
Maytag
A284
Washer - Top Loading
Maytag
A312
Washer - Top Loading
Maytag
A312S
Washer - Residential