Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) mach...
A washer that walks across the floor or becomes unusually noisy may have a weak suspension damper. The rear shock absorbs tub movement during washing and spinning, helping the machine run more smoothl...
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gregory
February 23, 2023
Our washing machine comes on door clicks sounds like water is filling then in the time screen there are lines that keep going around and cycle doesn't start.
For model number WV60M9900AV
Hi Gregory, thank you for reaching out. The following parts need to be checked to fix the issue: the water level pressure sensor, part number PS4217083, the rotor position sensor, part number PS4204673, and the door switch, part number PS12072637. If that does not help, we would recommend checking the temperature sensor, part number PS4216271, and the control board, part number PS12084899. We hope this sorts out your problem!
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
