A washer that walks across the floor or becomes unusually noisy may have a weak suspension damper. The rear shock absorbs tub movement during washing and spinning, helping the machine run more smoothl...
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
November 26, 2024
The washer spins during the washing cycle but doesn’t spin during the spinning cycle and water is left in the tube. I drained it and removed lint, a plastic item and some coins. It shows a a 4C error code in the spin cycle. Help! It stated a week ago..
For model number WV60M9900AV
Hello Robert, Thank you for your inquiry. The 4C error code indicates that the washing machine has detected a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose. First check the water supply, then the water inlet valve and water level pressure switch. If there is water left in the tub, you may also want to check the drain pump, check valve and hoses as well. If that does not solve the problem, then check the control board. Good luck with your repair
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
