These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
$7.31
In Stock
Order within the next 4 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 4 hrs and your part ships today!
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
$85.01
In Stock
Order within the next 4 hrs and your part ships today!
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
In Stock
Order within the next 4 hrs and your part ships today!
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
$35.94
In Stock
Order within the next 4 hrs and your part ships today!
If your washer won’t start, spin, or agitate, this shift actuator might be the fix. It helps switch between wash and spin cycles and controls the agitator’s movement. It fits many Whirlpool, Maytag, a...
$82.49
In Stock
Order within the next 4 hrs and your part ships today!
This suspension rod kit includes four rods that stabilize the wash tub, reducing vibrations and movement during cycles. It is compatible with a range of washing machines and helps improve performance ...
$113.97
In Stock
Order within the next 4 hrs and your part ships today!
This fabric softener dispenser releases softener at the proper time during the wash cycle to ensure even distribution. It helps prevent residue buildup on clothing and supports consistent fabric care....
$34.08
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for WTW4800BQ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
25 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
February 18, 2020
When spinning the basket hits the side walls of the unit. I looked on youtube and found worn shock absorbers the cause for other models but i don't see shock absorbers in the diagrams
For model number WTW4800BQ0
Hello Michael,
Thank you for your question. The shock absorbers are called the suspension rod which come in a kit of four for your model under part PS11703288. We hope this helps.
My washer will go through the entire cycle and shut off just like it’s supposed to. Then, sometimes - not every load - it just goes back and starts itself and runs through the entire cycle all over again. What could cause this to happen?
Thank you!
For model number WTW4800BQ0
Hi Sheri, thank you for contacting us. Based on our understanding, we would suggest checking the control board, part number PS8768789. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace it to fix the issue. We hope this solves your problem!
My washer isn't working properly. It will fill with water and then it just drains out. The door latch doesn't lock and it doesn't spin. If i mess with it enough it will finally start working right. But now it's just filling and then draining no spin but i can hear the motor running. Sometimes it will fill and lock but then it just sits on spin and quits running all together
For model number WTW4800BQ0
Hi shannon. You will probably need a replacement door latch. Thank you for your question and good luck with your repair.
I replaced the lid latch and my washer still will not run. What should i do next?
For model number WTW4800BQ0
Hello, Thank you for your question. You will want to check the shift actuator, and the belt. If those parts check out you will need to look into replacing the start push button- Part #: PS11756648. We hope this helps, good luck with this repair.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Rob
February 14, 2020
Will start to spin then just stops spinning
For model number WTW4800BQ0
Hello Rob, thank you for writing. The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. I hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs. Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out). Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
pull off softner dispenser, pop off agitator cap by inserting straight screw driver into small slot, remove bolt inside agitator with socket wrench and long extension, pull agitator straight up off shaft, place agitator on floor, with feet holding bottom half pull top half apart from bottom half by pulling straight up, note direction of old cogs remove and replace with new, reassemble
