This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stop...
$125.28
In Stock
Order within the next 5 hrs and your part ships today!
This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. If...
$184.45
In Stock
Order within the next 5 hrs and your part ships today!
This clutch housing assembly with mode shifter, or washer drive shaft and shifter assembly, is made for your washer. It connects the appliance wash plate to the motor so the washer can shift the drive...
$381.76
In Stock
Order within the next 5 hrs and your part ships today!
The motor stator works with the motor rotor to rotate the spin basket.
$279.17
On Order
Questions And Answers for WT1501CW
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
June 13, 2024
Door an hinges broken
For model number WT1501CW
Hi Gary, thank you for the question. If you are looking for the washer lid, its part number is PS8749221. The washer top lid hinges are part number PS7795475, and the lid hinge dampers are part number PS11708924. They are sold individually. We hope that helps!
Popped out the plastic "doors" that cover the metal actuators. Removed the metal actuators on both right and left sides of the door then unscrewed (3 screws each actuator) them from door frame. Slid the actuators out to enable the door to be removed. Unscrewed 2 screws on the top front of the washer which enabled me to angle the top of the washer to expose the screws that hold the plastic hinges. Unscrewed the hinges (2 screws each) and replaced both of the hinges (I figured I'd do both of them now so I don't have to do it again for another 15 years). Put everything back together and all works like new.
Started by lifting lid and removing the 2 rectangular plastic pieces that cover the hinge dampers (very small, thin flathead screwdriver). Removed hinge dampers (3 screws each) then removed lid. Removed the 2 top, front screws (covered with plastic caps). Then I removed the 2 screws on the top, back panel (nut driver). This allows the top to be lifted in a way that allows you to remove the screws (2 each) that secure the plastic hinge. Be careful here. The top has a wiring harness connected to it. Removed the screws from underneath the hinge and removed the hinge. Inserted the new hinge and screwed it in. After the hinge is installed you can reattach the top. Took this opportunity to clean everything with the lid removed. I then installed 2 new dampers. You’ll have to align the with the hinges so that the 2 flats on the damper shaft fit back into the hinge to secure the lid (easy). Tighten all the screws and voila!
