This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
This electronic control board is a critical component in refrigerator systems, responsible for regulating temperature settings and managing cooling and defrost cycles. If your appliance is experiencin...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. ...
$76.94
In Stock
Questions And Answers for WRF535SWHZ02
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
26 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jaime
April 2, 2022
What does my refrigerator stop working and temperature control panel is in blank
For model number WRF535SWHZ02
Hello Jaime, Thank you for the question. With the information provided, this could indicate the Electronic Control Board is faulty and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
electronic controll has a dash instead of the temperture setting
For model number WRF535SWHZ02
Hi Charles, thank you for reaching out. Based on the description, we would recommend a hard reset of the refrigerator by unplugging it for 5 minutes, and turn it on back. If it does not solve the issue, you may have a faulty control board, part number PS11755733. We would recommend checking the control board to fix the issue. We hope this solves your problem!
My filter housing is leaking. How do I replace filter cover.
For model number WRF535SWHZ02
Hi Barry, thank you for reaching out. We have attached the video in which it is explained that how you can replace the part. Glad to be of help!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Arthur
October 9, 2025
The fridge/freezer is working fine, the condenser fan motor/fan is making louder than normal noise like if the fan is rubbing the shroud. Should I replace the plastic fan blade or is the condenser fan motor-do the bearings make that noise?
For model number WRF535swhz02
Hello Arthur, thank you for reaching out. A rubbing noise from your refrigerator's condenser fan can come from either a problem with the plastic fan blade or the motor's bearings. While worn motor bearings often make a grinding or squealing sound, a louder rubbing sound can be caused by either component. If the fan blade is cracked, warped, or rubbing against the shroud, replacing just the plastic fan blade may solve the problem. If the fan blade are good, then replacing the motor should fix the issue. The condenser fan motor for your model is part number PS16744942, and the fan blade is part number PS11738623. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
June 18, 2024
Water is dripping from the back of my filter cover. Replaced filter but it is still leaking. What do you recommend I do?
For model number WRF535SWHZ02
Hello Richard, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the water filter head, part number PS12712109, to solve the problem. It holds the water filter and connects the water lines to the water filter. Glad to be of assistance!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat (located just above the evaporator) and a relay on the control board (located in the fridge control panel). Checked the heater with an ohm meter -- OK. The thermostat closes the circuit at around 20 degrees and opens at around 32 degrees. Pulled out the thermostat, wiring, fan unit. Everything unplugs, unscrews, and unclips, don't cut wires. Put the whole assembly in a friends freezer for an hour or so to see if the thermostat closes -- OK. Problem had to be with the control board. Replaced control board, reprogrammed it per included instruction. Everything is working again.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
