This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
This Charcoal Filter traps grease from your oven's exhaust to help prevent it from entering the vent, which could cause damage over time. If the exhaust fan on your microwave is not working, you may n...
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be pro...
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose
November 26, 2019
When cooking, the fan doesn't come on but when you manually turn the fan on it works well in both speeds. In order for me to cook for more than a minute i have to turn the fan on manually.Thanks
For model number WMH1163XVS1
Hello Jose and thanks for writing.
It sounds like you might have a defective switch. Check the part and replace it if necessary.
Door switch # PS10057151
Interlock switch # PS2361111 We hope this helps. Please contact us anytime.
Is it possible for me to get the door inner splash guard
For model number WMH1163XVS1
Hello Steven, thank you for reaching out. The inner door splash guard you are looking for does not come separately. You may have to order the complete door assembly, part number PS2352831. We hope this solves your problem!
what would cause the fuse to blow. . i replaced the blown fuse and the replacement blew a few minutes after installing
For model number WMH1163XVS1
Hi Keith, thank you for reaching out. If a microwave fuse keeps blowing, it may be because the fuse is not being installed correctly. Also, make sure that you are using a fuse that is compatible with your model. The compatible fuse for your model is part number PS1960938. The most common cause of a blown fuse is when something draws too much power from the circuit. This is most often caused by either too many lights or by using too many plug-in appliances at once. A power surge may also cause the microwave’s main fuse to blow. Experimenting with other power outlets may reveal an issue with the power outlet or electrical wiring that is causing the fuse in the microwave to blow. We hope this information is useful!
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
I first went back Lowe's where I purchased my microwave in the hopes they would help in the ordering of the grill vent for my mircrowave. They advised me that they do not order parts and gave me a card of a company to call to order the part. I called the number on the card and was left on hold for 20 minutes then instead of helping me with the part I needed they proceeded to set up an appointment for someone in my local area to come to my home, order the part the later install. I knew that it was just 2 screws and bottom snaps to install and I didn't want to wait a week for someone to come to my home. I then went direct to the Whirlpool web-site and found "Partselect.com". I was unable to match my model# even though my microwave was only 13 months old but knew it was probably interchangeable with another so I then called "Partselect.com" and was just amazed at how helpful and knowledgeable the gentleman on the other end was. He found my part and was very patient in describing it to me to assure that it was the correct one. I was on the phone less than 10 minutes with him. The part came in 3 days and was the correct part:) It took me less than 5 minutes to gently snap the 2 bottom tabs in and screw in the left and right tabs on top. Thank you so much "Partselect.com" for making what could have been a timely and expensive part replacement be so very simply and inexpensive.
