Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles. This shock absorber is for washers.
Shock absorber absorbs the vibrations and movements of the oute...
This is a replacement tub-to-pump hose for your washer. This hose runs from the bottom of the tub to the water pump, and is used to transport water. The hose can develop a hole, and when this happens ...
Water inlet valve controls the water flow into the washer.
Fits some washers in the following series: Kenmore 110; Whirlpool CHW, WFW and YWFW; Maytag CHW, MHN, MHP, MHWE, MHWZ and YMHWE; Amana NFW...
This is the replacement bellow clamp for your washer. It is approximately 18 inches in diameter and is sold individually. The bellow clamp goes around the bellow in your washer and holds it in place o...
This part is the replacement drive belt for your washer. It is made of black rubber and is approximately ½ an inch wide and 48 inches long. It has 6 grooves and is sold individually. The drive belt is...
$64.15
In Stock
Questions And Answers for WFW9151YW00
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maddie
February 19, 2020
How many cubic feet is this washing machine ? Thanks!
For model number WFW9151YW00
Hello Maddie,
Thank you for your question. Your washing machine under model WFW9151YW00 has a 3.5 cu ft. We hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Lynn
March 7, 2020
What is the capacity
For model number WFW9151YW00
Hello Lynn, thank you for your question. We found that your model is listed: Capacity: 3.5 Cu. Ft. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carol
February 18, 2020
How to fit error "lf" code on washer. Tech came out & replaced 3-shock absorbers & charged me over $400. I still get same error code.
For model number WFW9151YW00
Hello Carol, thank you for your question. The LF error code is in relation to a long flow of water into the unit. The unit has detected an issue with the water coming into the unit. We would recommend checking the water valve and the dispenser to check to see if the hoses are clogged. I hope this helps.
Was this helpful?
Thank you for voting!
Lyn
September 8, 2022
what are the specs for this washing machine? height width
For model number WFW9151YW00
Hi Lyn,
Thank you for your question. This washer measures 36 inches high by 30-1/2 inches deep by 27 inches wide. It has a capacity of 3.5 cubic feet. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Bruce
December 14, 2022
water level pressure switch avalible for this unit ser# HL21431974 TYPE 832-A
For model number WFW9151YW00
Hello Bruce, thank you for contacting us. The water level pressure switch, part number PS12745510, will fit your model. It senses and controls the water level in the washer. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Removed the front panel unplugged The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in.
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins.
This model is a front-loading washer. The spring loaded retainer for the front of the boot must be removed, then the boot can moved to the side exposing the module. Remove the two screws holding the model, pull the model out, remove the three electrical plugs, then reverse this procedure to install new module.