This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch control...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
If your range’s burner isn’t heating properly or the temperature seems off, this dual element control switch could be the fix. It’s designed to manage heat for dual surface elements and fits a variety...
This Whirlpool OEM 2400-watt bake element has push-on terminals and is located on the bottom of the oven cavity. The bake element supplies heat while baking. If the oven is not heating properly the ba...
This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this pa...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid range...
$73.53
In Stock
Questions And Answers for WFE510S0AB0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick
January 5, 2020
Sometimes the right front burner will stay on when set to about medium heat or above.
For model number WFE510S0AB0
Hello Rick, thank you for your question. We would recommend replacing the burner switch for that burner. The switch regulates the temperature so if the burner is not regulating properly the most likely issue is the switch. That is Part Number: PS11740783. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
March 26, 2024
Glass top is broke
For model number WFE510S0AB0
Hello Jim, thank you for getting in touch. The main top glass you are looking for is part number PS2350406. If you need help placing an order, customer service is open 7 days a week!
MY BOTTOM OVEN ELEMENT IS NOT GETTING HOT BUT THE TOP ONE IS HOT.
For model number WFE510S0AB0
Hello Geraldine, thank you for getting in touch. Based on our understanding of the problem, we would suggest checking the bake element, part number PS11752501, to fix the issue. A malfunctioning bake element can most probably cause this problem. We hope this helps!
The oven light and clock works but the top elements and oven elements do not work.
For model number WFE510S0AB0
Hi Roy,
Thank you for your question. If both the surface and oven elements are not working, but the clock and light is working, the part that fixes this issue the majority of the time is the terminal block. It connects the individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness. Some symptoms replacing the terminal block could be a solution for are little to no heat when baking, element will not heat and/or it will not start. This part will prevent loosening and will reduce damage caused by corrosion (by two different metals). There are some other parts that you should check as well. Here is a link from our website on what other parts that may be causing this issue, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=WFE510S0AB0&mfgModelNum=&fkMfgID=3&ModelMasterID=368863&PID=40. You will need to test the electrical parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. We hope this helps. Thank you and have a great day.
Circuit breaker trips when you use back right burner
For model number WFE510S0AB0
Hi Angela, thank you for reaching out. We have researched the model and would recommend checking the burner surface element switch, part number PS11740783. A shorted switch might be causing the breaker to trip. We would also suggest checking the wirings to the terminal block, part number PS11750972. We hope this helps!
first I pulled the stove from the wall. Then unplugged the stove from the wall (electric stove) for safety. then I removed the middle back panel screws(2) and then the panel. I then pulled the wires off the heating element that was bad. I took the screws (2) off the heating element inside the oven. I had to use WD-40 to loosen the screws because with the heat they were really stuck. I removed the heating element and replaced it with the one I got through partselect.com. Put everything back and walla finished. Partselect.com sent me the right part at the right price and fast. No hassles at all.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
![Replacing the Infinite Control Switch, 6"](https://img.youtube.com/vi/Iiozm-ZzeRw/maxresdefault.jpg "Replacing the Infinite Control Switch, 6"")
