This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch control...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
If your range’s burner isn’t heating properly or the temperature seems off, this dual element control switch could be the fix. It’s designed to manage heat for dual surface elements and fits a variety...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid range...
This oven rack offers a sturdy, chrome-finished surface for baking, roasting, and broiling in your range. It fits a wide selection of compatible ovens and is built to handle high heat and frequent use...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
September 12, 2022
When set at 350 temp. And after the oven has come up to temperature setting ,The heating elements cycle off at 365 degrees and come back on at 320 degrees, is this normal?
For model number WFE320M0EB2
Hi Kevin, thank you for your question. If your oven temperature fluctuates, you will need to test the oven temperature sensor, part number PS11749737. The oven temperature sensor works together with the oven control board to measure and regulate the oven temperature. Check your oven temperature sensor with a multimeter. The resistance of the sensor should read approximately 1080–1090 ohms at room temperature. Also, check the plugs and the electrical cords that send power to your oven. Inconsistent connection to electricity will cause the oven temperature to fluctuate. We hope this helps, good luck with this repair.
My stove was hit by an electric surge. The panel now reads F9. Cooktop works but I cannot program the oven, clock, or timers. What part do I need?
For model number WFE320M0EB2
Hello Donna, thank you for reaching out. According to our research, the error code appears when there is a fault related to the oven door, bad wiring, or a voltage fluctuation. First, we would recommend checking the voltage in the power source and the circuit breaker via a voltmeter. If there is any fluctuation in voltage, you may need to replace the wiring. If the voltages are fine, you may need to replace the door hinge, part number PS11752377. We hope this sorts out your problem!
My hinge broke on stove, so which are the replacement dooor hinges?
For model number WFE320M0EB2
Hi Kassie, thank you for the question. The right side door hinge for your model is part number PS11752377, and the left side door hinge is part number PS11752379. You may need to replace these to fix the issue. We hope this solves your problem!
Hi Sandra, thank you for contacting us. To change the oven light, you may need to turn the glass bulb cover in the back of the oven counterclockwise to remove. Turn the bulb counterclockwise to remove from the socket. Replace bulb, then bulb cover by turning clockwise. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire from the old switch and replaced them in the same position on the new switch. inserted new switch into the stove and attached the 2 screws. replaced back panel and pluged in stove. all tested well
![Replacing the Infinite Control Switch, 6"](https://img.youtube.com/vi/Iiozm-ZzeRw/maxresdefault.jpg "Replacing the Infinite Control Switch, 6"")
