WF520ABW Samsung Washer - Overview
Models starting with WF520ABW
Click on the best match to narrow your results.
- WF520ABW (XAA-0005) Samsung Washer (WASHER)
- WF520ABW (XAA-0002) Samsung Washer (WASHER)
- WF520ABW (XAA-0001) Samsung Washer (WASHER)
- WF520ABW (XAA-0006) Samsung Washer (WASHER)
- WF520ABW (XAA-0004) Samsung Washer (WASHER)
- WF520ABW (XAA-0003) Samsung Washer (WASHER)
- WF520ABW (XAA-0007) Samsung Washer (WASHER)
- WF520ABW (XAA-01) Samsung Washer (Samsung Wf520abw/Xaa-01 Washer)
- WF520ABW (XAA-02) Samsung Washer (Samsung Wf520abw/Xaa-02 Washer)
- WF520ABW (XAA-03) Samsung Washer (Samsung Wf520abw/Xaa-03 Washer)
- WF520ABW (XAA-04) Samsung Washer (Samsung Wf520abw/Xaa-04 Washer)
- WF520ABW (XAA-05) Samsung Washer (Samsung Wf520abw/Xaa-05 Washer)
- WF520ABW (XAA-06) Samsung Washer (Samsung Wf520abw/Xaa-06 Washer)
- WF520ABW (XAA-07) Samsung Washer (Samsung Wf520abw/Xaa-07 Washer)
- WF520ABW Samsung Washer (Samsung Washing Machine Wf520abw)
- WF520ABWXAA Samsung Washer (Samsung Washing Machine Model WF520ABWXAA Parts)
Keep searches simple, eg. "belt" or "pump".
Washer Door Lock Latch
PartSelect #: PS11745016
Manufacturer #: WP8182634
This part helps keep your front-load washer safe and working properly. It locks the door during cycles so it doesn’t open unexpectedly, and it also tells the washer when the door is shut so it can sta...
$141.50
In Stock
Order within the next 3 hrs and your part ships today!
Washer Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$11.52
In Stock
Order within the next 3 hrs and your part ships today!
Affresh Washing Machine Cleaner - 3 pack
PartSelect #: PS1960673
Manufacturer #: W10135699
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) mach...
$26.85
Special Order
Hex Head Bolt
PartSelect #: PS4205366
Manufacturer #: DC60-40137A
This part is used for the shaft on rear of the tub. Sold individually.
$19.28
In Stock
Order within the next 3 hrs and your part ships today!
Hinge Guide
PartSelect #: PS11741542
Manufacturer #: WP34001192
Sold individually.
$14.25
In Stock
Order within the next 3 hrs and your part ships today!
Inlet Hose - 5 FT
PartSelect #: PS11746820
Manufacturer #: WP89503
This hose can handle hot or cold water and is five feet long.
$27.55
In Stock
Order within the next 3 hrs and your part ships today!
Drawer Tub Hose
PartSelect #: PS4212941
Manufacturer #: DC67-00467A
$114.26
In Stock
Order within the next 3 hrs and your part ships today!
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
$5.95
In Stock
Order within the next 3 hrs and your part ships today!
Drain Pump Assembly - 120V 60Hz
PartSelect #: PS4204638
Manufacturer #: DC31-00054A
This drain pump is designed to remove water from the washer during the drain portion of the cycle. It is recommended to unplug the washer before installation to ensure safety. The Samsung Washer Drain...
No Longer Available
Common Symptoms of models starting with WF520ABW
[Viewing 9 of 9]Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
front load washer latch replacement
1. remove the three screws from the top backside of the top panel
2. push the top panel to the rear 1/8 to 1/4 inch
3. lift/rotate top panel from rear to front, set aside.
4. remove the three wire connectors from latch.
5. use #15 Torx to remove the three screws from the latch.
6. remove and replace part using top opening.
7. reverse order to finish.
2. push the top panel to the rear 1/8 to 1/4 inch
3. lift/rotate top panel from rear to front, set aside.
4. remove the three wire connectors from latch.
5. use #15 Torx to remove the three screws from the latch.
6. remove and replace part using top opening.
7. reverse order to finish.
Parts Used:
-
James from Vilonia, AR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
198 of 242 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door lock was in the locked position and door could not close
I bought a new door lock for 132 dollars (item number PS2037196).
Ultimately you have to get to the inside of the machine where the door lock is located in order to see if you will need this door lock that I bought.
DISCONNECT POWER FROM MACHINE.
First take off the top by taking off the 2 screws on the back of the machine.
Second take off the control panel, I believe there are about 5 or 6 screws for that.
(there's also a screw when you open up the detergent compartment on the bottom left- also, a lever must be pushed in order for the compartment to come off- it MUST be taken off).
Third unscrew the top of the front white plate.. there should be a 5 or 6 screws for that.
You don't need to take off the entire front plate.
Finally unscrew 3 screws that hold the door lock in place .. make sure your hands is in the machine- the back of door lock to catch the lock when you're on the last screw.
Gently take out the door lock from the side with the cables attached by holding the white metal door open (it bends).
Try to pull on the bottom of the door lock (its a manual release). If it doesn't release you need to buy a new door lock like I did... if it does release then you don't need a door lock and just reassemble.
(Note: You can also try plugging in the machine and THEN pulling down on the manual release. When I tried this the door lock just vibrated and nothing happened so I bought a new door lock.)
If you have the new door lock continue here:
Take out all 3 cables on the old door lock by pressing on the corresponding clips.
Attach the new door lock with the correct cables. Assemble machine back together.
Thats it.
Ultimately you have to get to the inside of the machine where the door lock is located in order to see if you will need this door lock that I bought.
DISCONNECT POWER FROM MACHINE.
First take off the top by taking off the 2 screws on the back of the machine.
Second take off the control panel, I believe there are about 5 or 6 screws for that.
(there's also a screw when you open up the detergent compartment on the bottom left- also, a lever must be pushed in order for the compartment to come off- it MUST be taken off).
Third unscrew the top of the front white plate.. there should be a 5 or 6 screws for that.
You don't need to take off the entire front plate.
Finally unscrew 3 screws that hold the door lock in place .. make sure your hands is in the machine- the back of door lock to catch the lock when you're on the last screw.
Gently take out the door lock from the side with the cables attached by holding the white metal door open (it bends).
Try to pull on the bottom of the door lock (its a manual release). If it doesn't release you need to buy a new door lock like I did... if it does release then you don't need a door lock and just reassemble.
(Note: You can also try plugging in the machine and THEN pulling down on the manual release. When I tried this the door lock just vibrated and nothing happened so I bought a new door lock.)
If you have the new door lock continue here:
Take out all 3 cables on the old door lock by pressing on the corresponding clips.
Attach the new door lock with the correct cables. Assemble machine back together.
Thats it.
Parts Used:
-
Suryakant from Cortlandt Manor, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
67 of 76 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Washer became unbalanced and broke the latch on door
Had to take the entire front of the washer off to replace the door latch.
Parts Used:
-
Glenn from Las Vegaas, NM
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
32 of 44 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!