The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
This is a replacement middle spray arm in your dishwasher. You will find your middle spray arm mounted on the bottom of the middle dish rack. The upper spray arm rotates and sprays water during the op...
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
$73.98
In Stock
Questions And Answers for WDF540PADM3
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darell
February 7, 2024
This is my first problem with the dishwasher, and it started suddenly a few days ago. Unit continuously runs. I've been pressing the drain button after about 90 minutes. Once drained, I can still smell soap. I'll start it again just to rinse off the soap. What is the problem?
For model number WDF540PADM3
Hello Darell, thank you for contacting us. We have concluded that the issue is with the turbidity sensor, part number PS12070543. We would recommend replacing it to fix the issue. Glad to be of help!
The blue "push" plastic latch on the utensil rack snapped in to two. Any replacements ?
For model number WDF540PADM3
Hi Jon, thank you for your question. You would have to replace your utensil rack itself there. That would be this part: PS12347808. Good luck with your repair.
unit turns on but does not function.
all the setting can be selected but nothing happens.
I unplugged it.
Is it the main board?
Is there a way to reset computer?
For model number WDF540PADM3
Hello John, thank you for contacting us. We believe your model is having this problem because of a faulty door latch. If the door latch is faulty, it might prevent the dishwasher from running. You may need to replace the door latch, part number PS11756967. There is no specific option to reset the control board. We can only reset it by unplugging the dishwasher from the power supply and plugging it back on after a few minutes. We hope this helps.
My dishwasher won't start. It was on and stopped during a cycle. Now there is water in the bottom and the control panel will not turn on. What part do I need?
For model number WDF540PADM3
Hello April, thank you for reaching out. Based on our research, we would recommend checking the wire harness of the control board for any damage. If this is not the issue, you may need to replace the electronic control board, part number PS11769631, to fix the issue. Glad to be of help!
The water doesn't get hot to wash, but the dryier does heat to dry.
The heating element seems to be o.k. Could this be the thermostat
causing this problem? Or maybe some other cause.
For model number WDF540PADM3
Hello Fred, thank you for getting in touch. Check the thermostat using a multimeter. If it is fine, you will need to replace the control board, part number PS11769631. Glad to be of assistance!
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
unscrewed dishwasher from cabinet ...,moved out slightly....while door closed ...reached with long nosed pliers door spring pulled forward...and allowing white plastic part that fits through sleeve and fit new sleeve over it...pulled spring attaching white plastic part and pushed unit back to cabinet and replaced screws DONE.
