This leveling leg (part number DC61-01722B) is for washers. Leveling leg DC61-01722B supports the washing machine. Adjust the height of the leveling leg to make the washer level. Unplug the washer bef...
$14.15
In Stock
Order within the next 7 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scotty
October 6, 2023
Impeller and tub does not spin but motor runs. No error codes detected by app.
For model number WA50R5200AW/US-00
Hello Scotty, thank you for the question. Based on our understanding of the issue, we would suggest checking the clutch assembly, part number PS12720875, to fix the issue. We hope this solves your problem!
My washer will not stay balanced no matter what I do. It will not finish a load and leaves my clothes soaking wet. Do I need to replace the shocks?
For model number WA50R5200AW
Hi Audrey, thank you for reaching out. Based on our understanding, we would recommend checking the suspension rod and spring assembly, part number PS12720841. It is sold individually. You may need to replace it to fix the issue. We hope this sorts out your problem!
Hello David, Thank you for writing. If the appliance rocks, it is not level. You can also use a level. If you do not have a level, put a bowl of water on top and check to see if the water sits level in the bowl or but a ball on top to see if it rolls off. Adjust the feet as needed. We hope this helps, good luck with the repair!
Was this helpful?
Thank you for voting!
Barbara
September 23, 2025
Why aren’t your extension springs sold in a set of four? To fix the off balance problem with this washer requires for.
Do you have them available in a four pack?
For model number WA50R5200AV
Hi Barbara, thank you for reaching out. We sell OEM parts only. The suspension springs for your model do not come in a set of 4. They are sold individually. We hope that helps!
Was this helpful?
Thank you for voting!
John
November 1, 2024
Hello, washer is leaking at the soap dispenser. Does not appear to be clogged or dirty. A couple DIYers say they have had this problem and it was the water valve. Would appreciate your input.
Thanks
For model number WA50R5200AW
Hello John, Thank you for contacting us. Checking your model, it does sound like either the water inlet valve or one of the hoses. Check for any visible damage and you can test the valve with a multimeter. Good luck with your repair.
