Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
December 18, 2019
Unit was running using the "potato" selection. After running approx 6 minutes it sounded like the auto hood van tried to come on then a "pop" and unit went dark. No display. Checked power to the unit, braker was not tripped. Is there a fuse on this unit? Suggestions?
For model number TMV151FSA
Hello Lisa, thank you for your question. There is no fuse in the unit, but we would recommend testing the three thermostats which could have blown. They are 5304456106, 5304456139, and 5304456094. If the thermostats are fine, the electronic board is probably the issue. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Melissa
February 17, 2020
How much for a glass turn plate
For model number TMV151FSA
Hello Melissa, thank you for your question. The glass cooking tray for this unit is PartSelect Number: PS1532535. Please enter the part number into the site for current price and availability.
Was this helpful?
Thank you for voting!
Josh
December 7, 2021
What is the part # for the glass plate Wanted to confirm before I order?
For model number TMV151FSA
Hello Josh, thank you for your question. We have found the part you are looking for is Number PS1532535. We hope this helps.
Was this helpful?
Thank you for voting!
Wendi
February 10, 2022
What does this part look like and where can I purchase one at. A high voltage capacitor
For model number TMV151FSA
Hello Wendi, thank you for writing. A voltage capacitor looks like a D battery, roughly 4 inches long and an inch wide mostly silver in color. The part PartSelect Number PS1532514 is discontinued with no replacement. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Purchased an OTR microwave at discount at Lowe's. Display model, so was missing parts. Had to order damper from parts select. I had to moldify the transition part to attatch it to oven. I had to cut the opening, and bend flanges on the sides, and bore holes for screws. Then I had to create templates for attatching the unit to the cabinets and rear wall. After doing that, I turned off the electrical power, and removed the old vent hood. Removed a section of the existing vent pipe, to allow space for the transition unit and elbows. It was necessary to cut a larger opening in the bottom of the cabinet for the new vent and bore holes for the mounting screws. The old hood had a 6" round vent, and the new one is rectangular.After measuring and locating studs in the back wall, I secured the holding bracket to the wall, using long wood screws and molly bolts. I hooked the bracket into the bottom of the oven, and tilted it into place, inserting the attatching screws through the holes in the cabinet bottom into the threaded holes in the oven. After tightening the screws, checking for level, I attatched the transition unit to the vent opening above the damper. I then attached the transition unit to the existing vent pipe, installed a junction box with grounded outlet to the existing wiring. [The original unit was directly wired into the electrical circuit--the OTR unit has a plug on a power cord]. Restored power, tested unit, and all worked well.