TMT116E1W0 Tappan Microwave - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Power, light, and clock work, micro/turntable not working
Much like the other post: 1. Removw vent case on top (3 screws) 2. Remove cover with control buttons (1 screw). 3. Removed bottom relay switch and replaced. Tight working space so be patient. Took 15 minutes Needle nose pliers used to crimp connector onto switch
Parts Used:
-
adam from new orleans, LA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Instructions did not match the assembly of the ice maker.
I managed to move the auger far enough to allow me to insert the cup-drive and then realign the auger with the new cup-drive. I also have had one to break very shortly after installing it. This is my second part to replace and this one went really smooth, since I understood that the initial parts installation instructions did not apply on my ice maker.
Parts Used:
-
Harry from Cypress, TX
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The roller support was worn out and would no longer rotate the turntable.
Lifted the old one out and inserted the new one. I would like to say I ordered the part late on a Sunday afternoon and installed it Wednesday moring. How great not to have to replace my whole unit! As technology changes nothing is ever the same size and being that my microwave was a built-in under the cabinet model, I was having nighmares about having to replace it. I was thirilled to find the part for a 15 year old appliance!!!!! Kudos to you!!!!
Parts Used:
-
KIM from GARDNERVILLE, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!