The Oven Bake Element is a black, metal part which supplies heat to the oven. This element is 19-1/2" wide x 18-1/2" long and has 3-1/2" inserts. It is rated as "Easy" to install by users, and attache...
This is a replacement rack for your oven. The oven rack fits into grooves on the side of the oven wall, and acts as a shelf that you can place food items on when you want to cook them in the oven. Thi...
$112.99
In Stock
Questions And Answers for TEF351EWN
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Billy
February 8, 2020
Range displays an error code of f10. Stove top burners work but control board will not allow anything else to be turned on.
For model number TEF351EWN
Hello Billy,
Thank you for your question. Our source suggest that if the error code f10 is appearing on your range, its likely either a defective temperature sensor under part PS1528542 for your model or a defective electronic control board under part PS12364897 for your model We suggest using a multi-meter to check both parts before ordering. We hope this helps.
What would cause the oven and all elements on stove to not heat at all ?
For model number TEF351EWN
Hello Dago, thank you for your question. The only part that could cause the oven and top elements to not heat would be a power issue. We would recommend testing the power cord and outlet that the unit is plugged into. I hope this helps.
Was this helpful?
Thank you for voting!
Gerald
August 23, 2023
need the part that holdeds up the burner from the pan
For model number TEF351EWN
Hi Gerald, thank you for reaching out. According to our research, we have found that your range has two different drip bowls, having a size of 6 inches and 8 inches. The part number for the drip bowl is PS437596 and PS437595, respectively. We hope this solves your problem!
The 3 prong metal that fits under the electric element on my range is bent. Can I order a new one? I looked on the parts list and did not see it. My stove is not new, and I think that the part is bent, because I set my heavy pressure pan (used for canning) on it.
For model number TEF351EWN
Hello Shirley, thank you for contacting us. The part you are looking for does not come separately. It comes as a part of a surface element. You may need to replace the surface element. The 6 inches surface element for your model is part number PS2582086, and the 8 inches surface element is part number PS2339241. Glad to be of help!
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element). 2. Ordered the part from partselect.com 3. Disconnected element, connected the new one, and screwed it back in.
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the wires. Threw the old element pieces in the garbage. Connected the new element to the connecting wires and re-fastened the hex nuts. My husband had wanted to call the repair man, but it didn't look too difficult, so I decided to try it on my own. Boy was he surprised when I fixed it, and for a fraction of the cost of hiring a repairman! Ladies, we can do this ourselves!!! :) Thank you for being there for us to order our part from, Parts Select, we had our new part in less than 24 hours, so the shipping was blazing fast!!! Keep up the good work!!! :)
