Models > SVD48600P

SVD48600P Jenn-Air Range - Overview

Sections of the SVD48600P

[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(28)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$37.19
  In Stock
Grease Filter – Part Number: WP71002111
Grease Filter
★★★★★
★★★★★
(18)
PartSelect #: PS11743870
Manufacturer #: WP71002111
The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, this filter may be 1/2" slimmer than the original, but will still function the same.
$39.01
  In Stock
Long Oven Sensor – Part Number: 12001656
Long Oven Sensor
★★★★★
★★★★★
(21)
PartSelect #: PS1570174
Manufacturer #: 12001656
This oven sensor kit comes with two harness adapters. This sensor detects the temperature within the oven cavity.
$47.67
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.43
  In Stock
Light Cover Lens – Part Number: WP9781049
Light Cover Lens
★★★★★
★★★★★
(20)
PartSelect #: PS11747414
Manufacturer #: WP9781049
This part goes over top of the light bulb.
$87.22
  In Stock
Front Burner Assembly - Black (Glossy Finish) – Part Number: WP7505P283-60
Front Burner Assembly - Black (Glossy Finish)
★★★★★
★★★★★
(3)
PartSelect #: PS11744567
Manufacturer #: WP7505P283-60
This black front burner assembly is nine inches long. It is used with Maytag brand gas ranges.
$287.95
  In Stock
Gas Valve Knob – Part Number: WP71001057
Gas Valve Knob
★★★★★
★★★★★
(1)
PartSelect #: PS11743848
Manufacturer #: WP71001057
This gas valve knob measures approximately 2 12 inches in diameter. It is a black knob that has white lettering aroud its perimeter denoting the different temperature levels: low, medium, high, etc. T...
$41.18
  In Stock
Rear Burner – Part Number: 74005189
Rear Burner
★★★★★
★★★★★
(1)
PartSelect #: PS1647215
Manufacturer #: 74005189
This black burner head has a glossy finish.
$429.04
  In Stock
Single Door Strike – Part Number: WP71002097
Single Door Strike
★★★★★
★★★★★
(1)
PartSelect #: PS11743868
Manufacturer #: WP71002097
This door strike is less than an inch long. It is all white in color and it is made entirely of plastic.
$18.79
  In Stock
Double Burner Pan - Black – Part Number: 3401X055-09
Double Burner Pan - Black
PartSelect #: PS2356975
Manufacturer #: 3401X055-09
This pan sits under the burner to catch anything that may spill over to make cleaning up easy. Also known as Aeration Pan. Sold individually.
$274.07
  In Stock
Bake Element - 240V – Part Number: WP71001680
Bake Element - 240V
★★★★★
★★★★★
(5)
PartSelect #: PS11743855
Manufacturer #: WP71001680
The element has male terminals. This bake element is found on the bottom of the oven.
$125.35
  In Stock
2 Piece Broiler Pan – Part Number: 4396923
2 Piece Broiler Pan
★★★★★
★★★★★
(2)
PartSelect #: PS971245
Manufacturer #: 4396923
The top of this part is now black.
$47.67
  In Stock

Questions And Answers for SVD48600P

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tommy
December 10, 2019
Oven light stays on all the time
For model number SVD48600P
PartSelect logo
Hello Tommy, Thank you for the question. I suggest replacing the Light Switch, PartSelect Number: PS11741002. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the SVD48600P

[Viewing 11 of 11]
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing
Show All
Will not program
Fixed by
these parts
Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace Grease Filter
Just a couple of minutes to left off the cover grid, left out the old filter and drop in the new one.
Parts Used:
Grease Filter
  • Gene from Washington C.H., OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
525 of 540 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not holding 350 F, when cooling the coils did not reheat
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Parts Used:
Long Oven Sensor
  • David from Westford, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
157 of 200 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace filter
Just placed it at the filter location. Liked the ring feature on the filter for ease of removal for cleaning. My previous ones didn't have such feature. Thank you for filling my order. I bought an extra filter for the future. I'm a big user of my Jenn-Air range. I may soon be needing to replace my griddle. Will be contacting your company then.
Parts Used:
Grease Filter
  • Marie from New Smyrna Bch, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
98 of 162 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!