SU111 Jenn-Air Range - Instructions

Dwayne from Minden, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

cooktop did not heat up

Just unplug the old broken cartridge and plug in the new one. It was very easy. Took 5 minutes.

Parts Used:

connie from demarest, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I wanted to replace the grill set and the older style solid cartridge element in my cook top.

I simply removed the old cartridge by lifting it up and pulling the plug end out. I slid the new coil cartridge with the plug end in its place. The grill replacement was similar. Remove the grll grates, pull out the burner element from its plug position, remove the grill rocks and insert the new coil cartridge in its place. No tools or special skills required. It's like I now have a new cook top.

Parts Used:

John from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Cartridge did not heat

Unplugged the old element and plugged in the new one.

The best part was it arrived less then 24 hours after I ordered it. Unbelievable, thank you.

Parts Used:

Jean from Gloucester, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Stove did not include any burners only grill

When burner insert arrived just plugged in. Piece of cake !

Parts Used:

Malcolm from Lynchburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

heating element was bad and couldn't locate anywhere else for this price. Outstanding service and phone assistance. Will use again for sure!

Simple repair. Unplugged element cart. and replaced.

Parts Used:

William from Lebanon, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bad burner on surface module.

Remove old module and insert new one. Took longer to get out of box than to install.

Parts Used:

Russell from CHAMPAIGN, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

heating elements in one cartridge did not heat; in the other cartridge, inifinite switch needed

Removed and replaced infinite switch ; removed and replaced both cartridge so that they matched

manual instructions were included in the email notification re' shipping confirmation

Parts Used:

Mary from BEACHWOOD, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Had only 2 burners on Jenn-Air stove

Remarkably easy. We had purchased a Jenn-Air with 2 burners and a grill. We found we rarely used the grill feature. We needed more burners. We looked several years ago but it was quite expensive to replace so we suffered through it. I decided I had to find the replacement part or purchase a new stove. I found your website and was shocked to see you carried what I needed. The new part was half as much as we previously priced it for. So, we ordered it and it worked immediately. Thank you so much. Saved me from buying a new stove. Linda

Parts Used:

Linda from Covington, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

heating element was cracked

I took out the old heating element and pluged in the new one. Very simple. Just like putting a plug into an electrical outlet

Parts Used:

dennis from Milton, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

old element did not work

just plugged it into the unit

Parts Used:

Steve from Centralia, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replaced grill for 2 more burners

Took out of box and plugged into slot.....even I was capable of doing this....easy

Parts Used:

vito from palm desert, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Cartridge was old and worn out.

Pulled out the old one, pluged in the new one. It took me longer to open the box! PartSelect made it so easy to order and the shipping was super fast and at low cost. I looked on ebay and saw people paying more (with shipping and handling) for used parts. Thank you PartSelect!

Parts Used:

Myron from Norwalk, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burners quit working

My old burners pluged in. I pulled out the old burners unpacked the the new burners pluged them in. I turned on the new burners and tested themand they worked!!

Parts Used:

chris from Henderson, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

my old cartridge was ugly and rusting out

Just unplugged the old cartridge and plugged in the new one. It took 2 seconds.

Parts Used: