ST400 Black and Decker Trimmer - Overview
Models starting with ST400
Click on the best match to narrow your results.
- ST400 (Type 2) Black and Decker Trimmer (12 Bump Feed String Trimmer)
- ST400 (Type 1) Black and Decker Trimmer (12 Bump Feed String Trimmer)
- ST400-04 (Type 2) Black and Decker Trimmer (12 String Trimmer)
- ST400-04 (Type 1) Black and Decker Trimmer (12 String Trimmer)
- ST400-BDK (1) Black and Decker Trimmer (12in Bf Strimmer)
- ST400-BDK (2) Black and Decker Trimmer (12in Bf Strimmer)
- ST4000 (Type 3) Black and Decker Trimmer (12 Groom-N-Edge)
- ST4000 (Type 2) Black and Decker Trimmer (12 Groom-N-Edge)
- ST4000 (Type 1) Black and Decker Trimmer (12 Groom-N-Edge)
- ST4000-04 (Type 3) Black and Decker Trimmer (12 String Trimmer)
Keep searches simple, eg. "belt" or "pump".
On-off Switch
PartSelect #: PS10170531
Manufacturer #: 383994-00
This is a Genuine Manufacturer Sourced replacement part used on a variety of Black and Decker Trimmers/Edgers. This item is Sold Individually. Switches are a commonly replaced part in power tools, han...
$7.44
In Stock
Bump Cap
PartSelect #: PS10184171
Manufacturer #: 682378-02
This genuine Black & Decker replacement spool cap is designed to hold the spool and bumper securely inside the spool housing of your trimmer. It features two snap-in tabs that make installation and re...
$24.23
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken power input terminal
I found this unit by the side of the road. One power input terminal was loose. Inside it was broken. Replacement was to remove the screws, pull out the wire, and cut the wire next to the terminal. I was able to strip the wire and crimp it in the terminal. I then soldered both terminals for a good connection.
Parts Used:
-
Curtis from Huntsville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
8 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!