This wheel is a dishwasher rack wheel designed for the upper rack of your appliance. The roller wheel is approximately 1.25 inches in diameters and includes the brushing you need for installation. It ...
This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
This dishwasher water inlet valve is a genuine replacement component engineered to regulate water flow into the appliance, ensuring accurate fill levels for optimal cleaning performance. Constructed t...
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
If you’re seeing water puddles near your dishwasher or noticing louder wash cycles, the bottom door seal might be worn out. This part keeps water and steam inside during a wash and helps your dishwash...
Keep your dishwasher or refrigerator draining properly with this replacement drain hose. It helps move used water out of the appliance and into your home’s plumbing system, preventing puddles and left...
If your dishwasher is leaking or not draining properly, this replacement drain hose might be the fix. It connects the dishwasher to your sink drain or garbage disposal, carrying away dirty water after...
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by sec...
If your dishwasher won’t start or keeps stopping mid-cycle, the door latch might be the issue. This replacement part locks the door securely so the machine can run safely and without leaks. It’s easy ...
$45.03
In Stock
Questions And Answers for SHX2AR55UC
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Glenn
January 10, 2025
How to turn off beeping sound that lets you know when cycle is done
For model number SHX2AR55UC
Hello Glenn, Thank you for your inquiry. To turn off the beeping sound or lower the volume, first enter options mode. With the door open, press the on/off button to turn the unit on, one of the wash cycle LED lights should be flashing. Press and hold the > button, then press and release the Start button. Now release the > button. The "Clean" light and one other light should be flashing. Press the > to select the option you would like to adjust. To set the Cycle Completion Signal:
1 With the “Clean”, “Sanitized” and “Refill Rinse Aid” LEDs flashing, press the < button to change the
cycle completion tone volume. The wash cycle LEDs will illuminate when you press <.
0 LEDs flashing = Cycle Completion Signal is OFF
1 LED flashing = low tone volume
2 LEDs flashing = medium tone volume
3 LEDs flashing = highest tone volume
2 Press Start to save your setting.
We hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and then just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
This was the third time I replaced a fill valve in a Bosch diswasher, twice in this unit and once in a previous unit. I read the installation hints on your web site and want to add the following suggestion.
The notes on your web site say you can remove the valve from behind the toe face and pull it out to reach the hose and plug. I found that the Bosch designers called for both the hose and wire to on the short side. I found that pulling the dishwasher forward 6" to 9" allows you to access these connections from the side at least to hold them while making the connection. I hope this helps. Thank you, Bill
