RY40021 Ryobi Trimmer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cutter for feeder broke off and required replacement of new deflector assembly
Repair was quick, simple and easy. Only tool needed was a phillips head screwdriver. Removal of three screws, remove old deflector, attach/align new deflector, insert screws and tighten. That's all to it. less than 2 minutes.
Parts Used:
-
Charles T from WALDORF, MD
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cover broke
-
Dennis from ARVADA, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
motor burned out
New motor was pretty much plug and play. Grass trimmer has about a dozen 2,5mm hex screws that hold the halves of the head together. Once unscrewed, there are two stickers that need to be peeled off with a blade (I used contact adhesive to reseat them after) and then everything comes apart. The motor has spade connectors but my original motor had pigtails so I chopped them off and crimped on some female connectors. Everything works like new!
Parts Used:
-
Nick from BOCA RATON, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!