RS30P - Overview

removed screws holding element and detached wires and simply removed it; no problem. Reversed the process to install the new one. The great thing is that I ordered this element one morning and received it the very next day! I have saved this website for future problem solutions because I know they are well organized and dependable. Thanks for saving our week!!

First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.

After removing the 2 screws, pulling the element out, & disconnecting the 2 wires, I started installing the new element. 20 years ago, this may have been easy, but...after so many years of use, and grease fumes and who knows what, the new connections were difficult to connect. However , after a few choice words and a few alcoholic beverages, the new burner was installed and it works great! Thank you & keep stocking those "old" parts. I have 3 more burners & an oven fixture left ta go!