RS2533SW Samsung Refrigerator - Overview
Sections of the RS2533SW
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
$2.99
In Stock
Order within the next 9 hrs and your part ships today!
Tapping Screw
PartSelect #: PS4133148
Manufacturer #: 6002-000213
$2.99
In Stock
Order within the next 9 hrs and your part ships today!
Fan Blade Assembly
PartSelect #: PS4138282
Manufacturer #: DA31-00010D
This condenser fan blade (part number DA31-00010D) is for refrigerators. Condenser fan blade DA31-00010D moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator...
$23.71
In Stock
Order within the next 9 hrs and your part ships today!
Defrost Sensor
PartSelect #: PS4138681
Manufacturer #: DA32-10105R
The Samsung Defrost Sensor (DA32-10105R) is a genuine part designed specifically for Samsung refrigerators. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is...
$33.43
On Order
Door Switch
PartSelect #: PS4138837
Manufacturer #: DA34-10120E
$44.55
In Stock
Order within the next 9 hrs and your part ships today!
Cover - Sensor;AD,PP,T1.0,
PartSelect #: PS4149137
Manufacturer #: DA63-02183A
$4.33
In Stock
Order within the next 9 hrs and your part ships today!
Evaporator with Defrost Heater
PartSelect #: PS4168194
Manufacturer #: DA96-00020Q
No Longer Available
Micro Switch
PartSelect #: PS11712663
Manufacturer #: 3405-001117
$19.17
In Stock
Order within the next 9 hrs and your part ships today!
Sensor Assembly
PartSelect #: PS4138684
Manufacturer #: DA32-10105U
$39.12
In Stock
Order within the next 9 hrs and your part ships today!
Common Symptoms of the RS2533SW
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice Build up behind refrigerator internal panel
I performed the repair to my own refrigerator, after watching multiple YouTube videos. I installed a secondary heater for the defrost coils and replaced the defrost sensor. The defrost sensor was actually bad. Today, 1/27/2024 I rechecked the fix from last week. All seems to be good so far.
If I get any build up of any ice on the bottom tray of the recessed panel where the drain port is located. I suspect I will also need a new Defrost Heater as well. For now the refrigerator is operating as expected. There is a small amount of ice build up as of today.
Also, I had recently replaced the drain tubes, added a longer heater element part to fit the drain hole, and cleaned the fins in the back of the refrigerator. Thank you.
If I get any build up of any ice on the bottom tray of the recessed panel where the drain port is located. I suspect I will also need a new Defrost Heater as well. For now the refrigerator is operating as expected. There is a small amount of ice build up as of today.
Also, I had recently replaced the drain tubes, added a longer heater element part to fit the drain hole, and cleaned the fins in the back of the refrigerator. Thank you.
Parts Used:
-
David from WILMINGTON, DE
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge side no longer cooled, freezer still workekd fine.
A couple of blogs said the freezer defrost sensor should be replaced, so I ordered one. Did not fix it. I did, however find a service manual online and one of the blog sites and it showed me how to remove the inside duct work. I discovered the fan the recirculates the air across the evaporator coil was not working. Ordered a new fan motor and installed it, fridge works perfectly now.
Parts Used:
-
Roger from Belle Fourche, SD
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Temperature Blinking
I removed all of the internal shelves from the refrigerator side. I then removed the cooling panels from the bottom area. this exposed the fan assembly and cooler. I found ice all over the unit. I had to unplug the refrigerator and used a hair dryer to melt the ice away. I then found the sensor and replace it. After putting the refrigerator back together, I plugged it in and let it cool overnight. I also put a thermometer to validate that cooling was stable. it has been a week with the new sensor and the refrigerator has not frozen over and has been very stable.
Parts Used:
-
Christopher from Queen Creek, AZ
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!