RN46 Bostitch Nailer - Overview

Models starting with RN46

Keep searches simple, eg. "belt" or "pump".
Seal,Check – Part Number: 149812
Seal,Check
PartSelect #: PS10246371
Manufacturer #: 149812
  No Longer Available
Spring,Torsion Door Latch – Part Number: 149831
Spring,Torsion Door Latch
PartSelect #: PS10246380
Manufacturer #: 149831
  No Longer Available
Feed,piston – Part Number: 149852
Feed,piston
PartSelect #: PS10246389
Manufacturer #: 149852
  No Longer Available
Nose – Part Number: 160143
Nose
PartSelect #: PS10246495
Manufacturer #: 160143
  No Longer Available
SCREW-SOC HD. CAP M5 – Part Number: MSC5080-20
SCREW-SOC HD. CAP M5
PartSelect #: PS12508345
Manufacturer #: MSC5080-20
$5.95
  Special Order
COLLAR-SPRING – Part Number: 149853
COLLAR-SPRING
PartSelect #: PS12413163
Manufacturer #: 149853
$5.95
  Special Order
CHECK PAWL PIN – Part Number: 9R210179
CHECK PAWL PIN
PartSelect #: PS12510793
Manufacturer #: 9R210179
$5.95
  Special Order
PIN-ROLL-3MM X 10MM – Part Number: MPG030010
PIN-ROLL-3MM X 10MM
PartSelect #: PS12522422
Manufacturer #: MPG030010
$5.95
  Special Order
FIXED PLUG – Part Number: 174087
FIXED PLUG
PartSelect #: PS12425796
Manufacturer #: 174087
$5.95
  In Stock
Order within the next 11 hrs and your part ships today!
Assembly,Sleeve – Part Number: 9R207544
Assembly,Sleeve
PartSelect #: PS12002890
Manufacturer #: 9R207544
  No Longer Available
STOP-FEED PISTON – Part Number: 149855
STOP-FEED PISTON
PartSelect #: PS12417198
Manufacturer #: 149855
$5.95
  Special Order
Lube (2cc) – Part Number: 9R206705
Lube (2cc)
PartSelect #: PS16684427
Manufacturer #: 9R206705
This genuine manufacturer-approved lube which is specially made for use with power tools. It helps to lubricate the system allowing for easy movement and protecting parts from usual wear. Please make ...
$5.95
  Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!