The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
$6.16
In Stock
Order within the next 8 hrs and your part ships today!
This ice maker assembly in your bottom-freezer refrigerator automatically produces and dispense ice. It consists of a mold for 9 ice cubes, a control device, and a 12-pin wiring connection and housing...
This genuine OEM ice bucket and auger assembly in your fridge is responsible for collecting and storing ice cubes in your freezer. It comes in a white color. If this bucket is damaged, you may notice ...
Order within the next 8 hrs and your part ships today!
Questions And Answers for RF4287HARS
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stan
January 1, 2024
the ice maker is off. how do I turn it back on?
For model number RF4287HARS
Hello Stan, thank you for your inquiry. According to our research, you can use the ice off button on the user interface control panel to turn the icemaker off or on. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Ava
April 19, 2023
I need the part for the door light switch to the refrigerator. the ice machine won't make ice, plenty of water pressure, new water filter, checked the light button and it doesn't shut off after over 1 minute of pushing it down
For model number RF4287HARS
Hi Ava, thank you for your question. The light switch, part number PS4138837, is the part you are looking for. If the ice maker does not make ice after you have replaced the light switch and you have switched on the ice maker, we recommend you replace the ice maker, part number PS5575307. We hope this helps!
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change when holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to - U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video the installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
